Bedienungsanleitung Fujifilm Finepix S9500 (Seite 13 von 73) (Englisch)

101604

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

24 25

Using the Camera

◆

Using LCD monitor

◆

You can adjust any angle of

the LCD monitor. It is useful to

shoot the subject that is in a

high or low location.

TAKING PICTURES

(

AUTO MODE

)

PHOTOGRAPHY MODE

Brace your elbows against your sides and hold the

camera with both hands.

●

Moving the camera while shooting gives a blurred picture

(camera shake). Use a tripod to prevent camera shake,

particularly for shots in the dark when the selected flash

mode is Suppressed flash.

●

There may be some uneven brightness at the lower edge of

the screen. This is normal and does not affect the

photographed image.

Hold the camera so that your fingers or the strap do

not cover the lens, flash and AF-assist illuminator.

If the lens, flash or AF-assist illuminator is obscured

by your fingers or the strap, subjects may be out of

focus or the brightness (exposure) of your shot may

be incorrect.

●

Check that the lens is clean. If it is dirty, clean the lens as

informed on P.125.

Frame the shot so that the subject fills the entire AF

(Autofocus) frame.

●

The image shown on the screen before the picture is taken

may differ in brightness, color, etc. from the image actually

recorded. Play back the recorded image to check it (➡P.31).

●

When the subject is not in the AF frame, use AF/AE lock to

take the picture (➡P.28).

●

When a short double-beep is not heard and “{” appears on

the screen, the camera cannot focus.

●

Pressing the shutter button down halfway freezes the image

on the screen briefly. This image is not the recorded image.

●

When “{” appears on the screen, press again the shutter

button down halfway or try standing about 2 m (6.6 ft.) from

your subject to take the picture.

●

The flash fires several times (pre-flashes and the main flash).

Press the shutter button down halfway. When a

short double-beep is heard, the camera focuses on

your subject. The AF frame on the screen becomes

smaller and the camera sets the shutter speed and

aperture. The indicator lamp (green) changes from

blinking to lit.

Bebeep

320320320320 F5.6F5.6F5.6F5.6

NNN

AF frame

Before the flash fires, “∑” appears on the screen. When selecting a slow shutter speed that will

cause camera shake, “

|” appears on the screen. Use the flash to take pictures. According to the

scene or mode being shot, use a tripod.

Press the shutter button down fully. When a

clicking sound is heard, the camera records the

image.

●

There is a slight delay between the shutter button being

pressed and the picture being taken. Play back the shot to

check the image.

●

When pressing the shutter button down fully in one motion,

the camera takes the picture without the AF frame changing.

●

When pressing the shutter button fully, the indicator lamp

lights orange (shooting disabled) and next picture can be

taken after turning off the indicator lamp.

●

When taking a picture using flash, the image may disappear

and go dark briefly due to flash charging. The indicator lamp

blinks orange during charging.

●

See P.130-131 for information on the warning displays.

Click

◆

Subjects not suitable for autofocus

◆

The FinePix S9000 / FinePix S9500 uses a high-precision autofocusing mechanism. However, it may

have difficulty focusing on the following:

h Very shiny subjects such as a mirror or car

body

h Subjects photographed through glass

h Subjects that do not reflect well, such as hair

or fur

h Subjects with no substance, such as smoke or

flames

h Dark subjects

h Fast moving subjects

h Subjects with little or no contrast between the

subject and the background (such as white

walls or subjects dressed in the same color as

the background)

h Shots where another high-contrast object (not

the subject) is close to the AF frame and is

either closer or further away than your subject

(such as a shot of someone against a

background with strongly contrasting

elements)

For such subjects use AF/AE lock (➡P.28) or

“MF” Manual focus mode (➡P.49).

◆

Compatible filters

◆

58 mm-diameter commercial available filters can be attached.

●

Do not use more than one filter at a time.

●

The lens cap (included) may not be used when attaching the filter.

◆

Support for a cable release

◆

●

Do not apply force to a cable release attached to the

camera. This could damage the camera.

Use a mechanical cable release with this camera.

To prevent camera shake, use a tripod (sold

separately) and cable release (sold separately).

Compatible cable releases

ISO 6053: 1979-compliant cable releases

Release

socket

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix S9500 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fujifilm Finepix S9500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info