Bedienungsanleitung Fujifilm Finepix V10 (Seite 12 von 59) (Englisch)

101606

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

22 23

Using the Camera

Use the LCD monitor to frame the shot so that the

subject fills the entire AF (Autofocus) frame.

●

The image shown on the LCD monitor before the picture is

taken may differ in brightness, color, etc. from the image

actually recorded. Play back the recorded image to check it

(➡P.26).

NNN

121212

Bebeep

1/125 1/125 1/125 1/125 F2. 8F2. 8F2. 8F2. 8

Press the shutter button down halfway. When a

short double-beep is heard, the camera focuses on

your subject. The AF frame on the LCD monitor

becomes smaller and the camera sets the shutter

speed and aperture. The indicator lamp (green)

changes from blinking to lit.

●

When a short double-beep is not heard and “{” appears on

the LCD monitor, the camera cannot focus.

●

Pressing the shutter button down halfway freezes the image

on the LCD monitor briefly. This image is not the recorded

image.

●

When “{” appears on the LCD monitor (the shooting

condition is too dark to focus on the subjects etc.), press

again the shutter button down halfway or try standing about

2 m (6.6 ft.) from your subject to take the picture.

Press the shutter button down fully. When a

clicking sound is heard, the camera records the

image.

●

There is a slight delay between the shutter button being

pressed and the picture being taken. Play back the shot to

check the image.

●

When pressing the shutter button down fully in one motion,

the camera takes the picture without the AF frame changing.

●

When taking a picture using the flash, the image may

disappear and go dark briefly due to flash charging. The

indicator lamp blinks orange during charging.

●

See P.103-104 for information on the warning displays.

Click

◆

Subjects not suitable for autofocus

◆

FinePix V10 uses a high-precision autofocusing mechanism. However, it may have difficulty focusing

on the following:

h Very shiny subjects such as a mirror or car

body

h Subjects photographed through glass

h Subjects that do not reflect well, such as hair

or fur

h Subjects with no substance, such as smoke or

flames

h Dark subjects

h Fast moving subjects

h Subjects with little or no contrast between the

subject and the background (such as white

walls or subjects dressed in the same color as

the background)

h Shots where another high-contrast object (not

the subject) is close to the AF frame and is

either closer or further away than your subject

(such as a shot of someone against a

background with strongly contrasting

elements)

For such subjects use AF/AE lock (➡P.24).

Before the flash fires, “∑” appears on the LCD monitor. When selecting a slow shutter speed that

will cause camera shake, “

|” appears on the LCD monitor. Use the flash to take pictures.

According to the scene or mode being shot, use a tripod.

NUMBER OF AVAILABLE FRAMES

The number of available frames appears on the

LCD monitor.

●

See P.39 for information on changing the quality setting.

●

The default quality “˘” set at shipment is “÷ N”.

NNN

121212

Display Status

Lit green Locking the focus

Blinking green Camera shake warning, AF warning or AE warning (ready to shoot)

Blinking green and

orange alternately

Recording to xD-Picture Card (ready to shoot)

Lit orange Recording to xD-Picture Card (not ready)

Blinking orange Charging the flash (flash will not fire)

Blinking red

i xD-Picture Card Warnings

No card inserted, Card not formatted, Incorrect format, Card full and xD-Picture Card error

i Lens operation error

✽ Detailed warning messages appear on the LCD monitor (➡P.103-104).

INDICATOR LAMP DISPLAY

TAKING PICTURES

(

AUTO MODE

)

PHOTOGRAPHY MODE

■ Standard number of available frames per xD-Picture Card

The table below shows the standard number of available frames for a new xD-Picture Card formatted on the camera. The

larger the xD-Picture Card capacity, the bigger the difference between the actual number of frames and the number shown

here. Also, the size of an image file varies depending on the subject. So the number of remaining shots may decrease by 2

or may remain the same. For this reason, the number displayed may not show the actual number of frames.

2592 × 1944

102

205

412

102

204

409

819

„

2736 × 1824

103

207

414

830

Quality setting

Number of recorded pixels

16 MB

1600 × 1200

101

204

2048 × 1536

162

325

651

1305

409

818

1639

640 × 480

122

247

497

997

1997

3993

7995

32 MB

64 MB

128 MB

256 MB

512 MB

1 GB

AF frame

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix V10 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info