Bedienungsanleitung Fujifilm Finepix V10 (Seite 47 von 59) (Englisch)

101606

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

USB socketUSB socketUSB socketUSB socketUSB socketUSB socket

USB socket

Viewing Images

The “Connecting to a PC” section explains how to connect the camera to your PC using the USB

cable (included) and describes the functions you can use once the camera and PC are connected.

If the power cuts out during data transmission, the data will not be transmitted correctly. Always use the

AC power adapter when connecting the camera to a PC.

Refer to Section 5 the first time you connect the camera to your PC.

Install the software first. Do not connect the camera to the PC before installing

all the software.

This mode provides a simple way to read images from an xD-Picture Card and store images onto

an xD-Picture Card.

CD-ROM

(Software for FinePix

CX)

DSC

(

Mass storage device

)

mode

6.3.1

Connecting to a PC

Insert an xD-Picture Card into the camera.

Gold markingGold marking

Gold contact areaGold contact area

1Press the “w” button for about 1 second to turn

the camera on in Playback mode.

2Select “¶” DSC in “ò” USB MODE in the

“˜” SET-UP menu (➡P.78).

3Turn the camera off.

DSCD SC

ENGLISHEN GL IS H

SETSE T

NTSCN T SC

OKOK

●

Movie images cannot be printed.

●

Images photographed with a camera other than FinePix V10

may not be printed.

1Press “d” or “c” to display the frame (file) for

which you want to specify PRINT settings.

2Press “a” or “b” to set a value up to 99 as the

number of copies of the frame (file) to be printed.

For frames (files) that you do not want printed,

set the number of prints to 0 (zero).

To specify more PRINT settings, repeat steps 1

and 2.

3Always press the “MENU/OK” button after the

settings are completed.

YESY E S

CANCELC A N C E L

FRAMEF R A M E

TOTALT O T A L

00009000090000900009

SHEETSS H E E T S

01 02 03

CAMERA CONNECTION

Disconnecting the printer

1Check that “PRINTING” is not displayed on the

camera’s screen.

2Turn the camera off. Unplug the USB cable

(included).

USB socketUSB socketUSB socketUSB socketUSB socketUSB socket

●

Press the “DISP/BACK” button to cancel the printing.

Depending on the printer, the printing may not be canceled

immediately or printing may stop midway through. When

printing stops midway, briefly turn the camera off and then on

again.

Printer starts printing the specified number of

prints.

PRINTINGP R I NT I N G

SHEETSSH EE T S

CANCELC AN C E L

1/91/9

“PRINT OK?” appears on the LCD monitor.

Press the “MENU/OK” button to begin printing.

PRINT OK?PR IN T O K?

SHEETSSH EE T S

TOTALT OTA L

9 9

YESY ES CANCELC A N CE L

1Turn your PC on.

2Connect the camera to the PC using the USB

cable (included).

●

Make sure that the USB cable (included) is connected

correctly and pushed in.

Continued

6.3 CONNECTING TO A PC

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix V10 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info