Bedienungsanleitung Fujifilm Finepix Z2 (Seite 12 von 61) (Englisch)

101614

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

Using the Camera

Use the LCD monitor to frame the shot so that the

subject fills the entire AF (Autofocus) frame.

●

The image shown on the LCD monitor before the picture is

taken may differ in brightness, color, etc. from the image

actually recorded. Play back the recorded image to check it

(➡P.27).

NNN

11111222222

Bebeep

Press the shutter button down halfway. When a

short double-beep is heard, the camera focuses on

your subject. The AF frame on the LCD monitor

becomes smaller and the camera sets the shutter

speed and aperture. The indicator lamp (green)

changes from blinking to lit.

●

When a short double-beep is not heard and “{” appears on

the LCD monitor, the camera cannot focus.

●

Pressing the shutter button down halfway freezes the image

on the LCD monitor briefly. This image is not the recorded

image.

●

When “{” appears on the LCD monitor (the shooting

condition is too dark to focus on the subjects etc.), press

again the shutter button down halfway or try standing about 2

m (6.6 ft.) from your subject to take the picture.

Press the shutter button down fully. When a

clicking sound is heard, the camera records the

image.

●

There is a slight delay between the shutter button being

pressed and the picture being taken. Play back the shot to

check the image.

●

When pressing the shutter button down fully in one motion,

the camera takes the picture without the AF frame changing.

●

When taking a picture using the flash, the image may

disappear and go dark briefly due to flash charging. The

indicator lamp blinks orange during charging.

●

See P.105-106 for information on the warning displays.

Click

1/80 1/80 1/80 1/80 F4. 2F4. 2F4. 2F4. 2

AF frame

1Open the lens cover.

2Set the Mode switch to “q”.

h Focal range

Approx. 60 cm (2.0 ft.) to infinity

●

Use Macro mode for subjects closer than about 60 cm (2.0 ft.)

(➡P.34).

●

When [CARD ERROR], [CARD NOT INITIALIZED], [CARD

FULL] or [NO CARD] appears, see P.105.

Brace your elbows against your sides and hold the

camera with both hands. Position your right thumb

so that it is handy for using the zoom.

●

Moving the camera while shooting gives a blurred picture

(camera shake). Place the camera on a stable surface to

prevent camera shake, particularly for shots in the dark when

the selected flash mode is Suppressed flash.

●

There may be some uneven brightness at the lower edge of

the LCD monitor. This is normal and does not affect the

photographed image.

Press “T” (telephoto) button to zoom in. Press “W”

(wide-angle) button to zoom out. A zoom bar

appears on the LCD monitor.

h Optical zoom focal length

(35 mm camera equivalent)

Approx. 36 mm to 108 mm

(

„: Approx. 38 mm to 114 mm)

Max. zoom scale: 3×

●

See P.80 for information on procedures for using Digital

zoom.

Hold the camera so that your fingers or the strap do

not cover the lens and flash. If the lens or flash is

obscured, subjects may be out of focus or the

brightness (exposure) of your shot may be incorrect.

●

Check that the lens is clean. If it is dirty (getting fingerprints

on the lens etc.), clean the lens as informed on P.102.

●

If the flash is used in dusty conditions or when it is snowing,

white dots may appear in the image due to flash reflecting off

the dust particles or snowflakes. Use Suppressed flash mode

(➡P.36) to fix the problem.

Zoom bar

NNN

11111222222

TAKING PICTURES

(

AUTO MODE

)

PHOTOGRAPHY MODE

◆

Subjects not suitable for autofocus

◆

FinePix Z2 uses a high-precision autofocusing mechanism. However, it may have difficulty focusing on

the following:

h Very shiny subjects such as a mirror or car

body

h Subjects photographed through glass

h Subjects that do not reflect well, such as hair

or fur

h Subjects with no substance, such as smoke or

flames

h Dark subjects

h Fast moving subjects

h Subjects with little or no contrast between the

subject and the background (such as white

walls or subjects dressed in the same color as

the background)

h Shots where another high-contrast object (not

the subject) is close to the AF frame and is

either closer or further away than your subject

(such as a shot of someone against a

background with strongly contrasting

elements)

For such subjects use AF/AE lock (➡P.25).

Before the flash fires, “∑” appears on the LCD monitor. When selecting a slow shutter speed that

will cause camera shake, “

|” appears on the LCD monitor. Use the flash to take pictures.

According to the scene or mode being shot, place the camera on a stable surface.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix Z2 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info