Bedienungsanleitung Fujifilm Finepix Z2 (Seite 47 von 61) (Englisch)

101614

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

92 93

Viewing Images

●

“PRINT WITH DATE” is not available when the camera is

connected to a printer that does not support date printing.

1Press “a” or “b” to select “PRINT WITH DATE”

or “PRINT WITHOUT DATE”. If “PRINT WITH

DATE” is selected, the date is imprinted on your

prints.

2Press “c”.

01 02

PRINT WITHOUT DATEP R I N T W I T H O UT DAT E

PRINT DPOFP R I N T D P O F

OKO K

PICTBRIDGEPIC TB RI D G E

PRINT WITH DATEP R I N T W I T H DAT E

●

Movie images cannot be printed.

●

Images photographed with a camera other than FinePix Z2

may not be printed.

1Press “d” or “c” to display the frame (file) for

which you want to specify PRINT settings.

2Press “a” or “b” to set a value up to 99 as the

number of copies of the frame (file) to be printed.

For frames (files) that you do not want printed,

set the number of prints to 0 (zero).

To specify more PRINT settings, repeat steps 1

and 2.

3Always press the “MENU/OK” button after the

settings are completed.

YESY E S

CANCELC A N C E L

FRAMEF R A M E

TOTALT O T A L

00009000090000900009

SHEETSS H E E T S

01 02 03

●

Press the “DISP/BACK” button to cancel the printing.

Depending on the printer, the printing may not be canceled

immediately or printing may stop midway through. When

printing stops midway, briefly turn the camera off and then on

again.

“PRINT OK?” appears on the LCD monitor.

Press the “MENU/OK” button to download the data

to the printer and start printing the specified

number of prints.

P RIR I N T I NGN G

CANCELC A N C E L

111199999

SHEETSS H E E T S

Disconnecting the printer

1Check that “PRINTING” is not displayed on the

camera’s screen.

2Press the “POWER” button on the cradle to turn

the power off.

“CHECKING USB” appears and then the menu is

displayed on the LCD monitor.

●

If the menu does not appear, check whether the “ò” USB

MODE setting is “

®” PICTBRIDGE.

●

Depending on the printer, some functions are disabled.

CHECKING USBCH E C K I N G U S B

PICTBRIDGEPIC TB RI D G E

6.2

CONNECTING THE CAMERA DIRECTLY TO THE PRINTER

—

PictBridge FUNCTION

6.2.2 Specifying images for printing without using DPOF

(

single-frame printing

)

1Press the “w” button for about 1 second to turn

the camera on in Playback mode.

2Select “®” PICTBRIDGE in “ò” USB MODE

in the “˜” SET-UP menu (➡P.78).

3Turn the camera off.

●

Do not connect to a PC when the “ò” USB MODE setting is

set to “

®” PICTBRIDGE. See P.108 if you connect to a PC

by mistake.

PICTBRIDGEP I C T B R I D G E

ENGLISHE N G L I S H

SETS E T

NTSCNTS C

OKOK

1Connect the cradle to the printer using the USB

cable (mini-B).

2Plug the AC power adapter connector into the

“DC IN 5V” socket on the cradle and then plug

the AC power adapter into the power outlet.

3Set the camera in the cradle.

4Turn the printer on.

Press the “POWER” button on the cradle.

01 02

●

Plug the camera securely and vertically into the cradle

connecting plug.

●

The camera cannot be used to specify printer settings such

as the paper size and print quality.

●

Use an xD-Picture Card that was formatted on FinePix Z2.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix Z2 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info