288592
54
Zoom out
Zoom in
Vorherige Seite
1/67
Nächste Seite
107
6
CAMERA CUSTOMIZING
106
DISCONNECTING FROM THE PC
Download “FinePix4800Customizer” software
from “http://home.fujifilm.com/products/digital/”.
Install the software in “DSCSETUP” folder in
the “FinePixViewer” folder on your PC.
Load a SmartMedia that has available space and
connect the camera (DSC mode) with the PC.
Use the FinePixViewer on the PC and transfer
the customizing data to the camera.
Disconnect the cradle from the PC and remove
the camera (P.106).
When you switch the camera on, the
customized screen appears.
Press “ c” to check the details.
Press the “MENU/OK” button to proceed.
1 2
Do not switch the SmartMedia during the
customization procedure.
!
If you selected “NO”, the customized screen appears
the next time you switch the camera on.
The figure shows
the Macintosh
screen display.
Card reader connection
Check that the self-timer lamp is not blinking
(the camera is no longer communicating with
your PC).
Select the correct procedure below for the
operating system used on your computer.
Windows 98
Check that the power lamp on the cradle is lit
steadily.
Windows Me/2000 Professional
Exit “FinePixViewer”. Then click the Eject icon in
the taskbar and eject the media. Check that the
"REMOVE OK" message is displayed.
Macintosh
Quit “FinePixViewer”. Drag the removable disk
drive icon on the desktop to the Trash and then
check that the power lamp on the cradle is blinking
slowly.
Press the “<” (power) button on the cradle
and then disconnect the cradle / camera from
the PC.
Remove the camera from the cradle.
Close the connection socket cover on the
bottom of the camera.
Always follow the procedure below before
disconnecting the camera from your PC.
PC-camera connection
You must exit “FinePixViewer”.
Check that the self-timer lamp is not blinking
(the camera is no longer communicating with
your PC).
Press the “<” (power) button on the cradle to
turn it off, and then disconnect the cradle /
camera from the PC.
Remove the camera from the cradle.
Close the connection socket cover on the
bottom of the camera.
54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fujifilm finepix4800 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info