288592
62
Zoom out
Zoom in
Vorherige Seite
1/67
Nächste Seite
123122
Problem Cause RemedyProblem Cause Remedy
Troubleshooting
Can’t format the
SmartMedia.
• The SmartMedia is write-protected. Remove the write-protection.
(Peel off the write-protect sticker.)
The ERASE ALL function
does not erase all the
frames.
• The frame is protected. • Remove the frame protection.
Nothing happens when I
use the camera switches
and dial.
• Camera malfunction.
The Mode switch and Mode dial has been
moved to another setting.
• The battery is exhausted.
Remove the battery, re-insert them and
try again.
• Set the Mode switch and Mode dial to the
correct setting.
• Load a new fully charged battery.
No image appears when I
press the “DISP” button.
The Mode switch and Mode dial has been
moved to another setting.
• Set the Mode switch and Mode dial to the
correct setting.
The camera does not
emit any sound.
• The camera volume is set too low.
The microphone was blocked during
shooting/recording.
The speaker was blocked during
playback.
• The A/V cable is connected.
• Adjust the volume.
Take care not to block the microphone
during shooting/recording.
• Take care not to block the speaker during
playback.
• Disconnect the A/V cable.
There is no picture on
the TV.
The camera and TV are connected
incorrectly.
• The TV input is set to “TV”.
• Connect the TV and camera correctly.
• Set the TV input to “Video”.
PC connection failed.
The camera and cradle are not connected
correctly.
The USB cable is not connected to the
cradle correctly.
• The camera and USB cable are not set up
correctly.
• The PC is not switched on.
• Connect the camera and cradle correctly.
Ensure that the USB cable is properly
connected to the cradle.
Set up the camera and USB cable
correctly.
• Switch the PC on.
The lens extends during
card reader connection.
The camera and cradle are not connected
correctly.
• The PC is not switched on.
• Connect the camera and cradle correctly.
• Switch the PC on.
I tried to charge the
battery but the self-timer
lamp does not light.
• There is no battery in the camera.
The camera and cradle are not connected
correctly.
The cradle and AC power adapter are not
connected correctly.
• Load the battery.
• Connect the camera and cradle correctly.
• Connect the cradle and AC power adapter
correctly.
The self-timer lamp blinks
during battery charging.
• The battery is old. • Install a new battery.
The camera no longer
works correctly.
The camera has suffered an unforeseen
problem.
Remove the battery briefly and then
reload the battery and try again.
62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fujifilm finepix4800 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info