Bedienungsanleitung Fujifilm X100S (Seite 2 von 144) (Englisch)

502358

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

For Your Safety

• Read Instructions: All the safety and operating instructions

should be read before the appliance is operated.

• Retain Instructions: The safety and operating instructions

should be retained for future reference.

• Heed Warnings: All warnings on the appliance and in the

operating instructions should be adhered to.

• Follow Instructions: All operating and use instructions

should be followed.

Installation

Power Sources: This video product should be operated only

from the type of power source indicated on the marking la-

bel. If you are not sure of the type of power supply to your

home, consult your appliance dealer or local power com-

pany. For video products intended to operate from battery

power, or other sources, refer to the operating instructions.

Grounding or Polarization: This video product is equipped

with a polarized alternating-current line plug (a plug having

one blade wider than the other). This plug will ﬁ t into the

power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try revers-

ing the plug. If the plug should still fail to ﬁ t, contact your

electrician to replace your obsolete outlet. Do not defeat

the safety purpose of the polarized plug.

Alternate Warnings: This video product is equipped with

a three-wire grounding-type plug, a plug having a third

(grounding) pin. This plug will only ﬁ t into a grounding-

type power outlet. This is a safety feature. If you are unable

to insert the plug into the outlet, contact your electrician to

replace your obsolete outlet. Do not defeat the safety pur-

pose of the grounding type plug.

Overloading: Do not overload wall outlets and extension

cords as this can result in a risk of ﬁ re or electric shock.

Ventilation: Slots and openings in the cabinet are provided

for ventilation, to ensure reliable operation of the video

product and to protect it from overheating, and these open-

ings must not be blocked or covered. The openings should

never be blocked by placing the video product on a bed,

sofa, rug, or other similar surface.

This video product should not be placed in a built-in instal-

lation such as a bookcase or rack unless proper ventilation

is provided or the manufacturer’s instructions have been

adhered to. This video product should never be placed near

or over a radiator or heat register.

Attachments: Do not use attachments not recommended by

the video product manufacturer as they may cause hazards.

Water and Moisture: Do not use this video product near wa-

ter—for example, near a bath tub, wash bowl, kitchen sink,

or laundry tub, in a wet basement, or near a swimming pool,

and the like.

Power-Cord Protection: Power-supply cords should be routed

so that they are not likely to be walked on or pinched by

items placed upon or against them, paying particular at-

tention to cords at plugs, convenience receptacles, and the

point where they exit from the appliance.

Accessories: Do not place this video product on an unstable

cart, stand, tripod, bracket, or table. The video product may

fall, causing serious injury to a child or adult, and serious

damage to the appliance. Use only with a cart, stand, tri-

pod, bracket, or table recommended by the manufacturer, or

sold with the video product. Any mounting of the appliance

should follow the manufacturer’s instructions, and should use

a mounting accessory recommended by the manufacturer.

An appliance and cart combination

should be moved with care. Quick

stops, excessive force, and uneven

surfaces may cause the appliance

and cart combination to overturn.

Antennas

Outdoor Antenna Grounding: If an outside antenna or cable

system is connected to the video product, be sure the anten-

na or cable system is grounded so as to provide some protec-

tion against voltage surges and built-up static charges. Sec-

tion 810 of the National Electrical Code, ANSI/NFPA No. 70,

provides information with respect to proper grounding of the

mast and supporting structure, grounding of the lead-in wire

to an antenna discharge unit, size of grounding conductors,

location of antenna discharge unit, connection to grounding

electrodes, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

Antenna Lead

in Wire

Ground Clamp

Grounding Conductors

(NEC SECTION 810-21)

Power Service Grounding Electrode

System (NEC ART 250. PART H)

Antenna

Discharge Unit

(NEC SECTION

810-20)

Electric Service

Equipment

Ground Clamps

Power Lines: An outside antenna system should not be lo-

cated in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power

lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such

power lines or circuits as contact with them might be fatal.

Use

Cleaning: Unplug this video product from the wall outlet be-

fore cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning.

Object and Liquid Entry: Never push objects of any kind into this

video product through openings as they may touch dangerous

voltage points or short out parts that could result in a ﬁ re or elec-

tric shock. Never spill liquid of any kind on the video product.

Lightning: For added protection for this video product re-

ceiver during a lightning storm, or when it is left unattended

and unused for long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable system. This will

prevent damage to the video product due to lightning and

power-line surges.

IMPORTANT SAFETY INSTRUCTIONS

Fujifilm X100S Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fujifilm X100S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info