Bedienungsanleitung Fujifilm XQ2 (Seite 9 von 164) (Englisch)

585557

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

For Your Safety

Q This product, which contains encryption

function developed in the United States,

is controlled by the United States Export

Administration Regulations and may not

be exported or re-exported to any coun-

try to which the United States embargoes

goods.

• Use only as part of a wireless network. FUJI-

FILM does not accept liability for damages

resulting from unauthorized use. Do not

use in applications requiring a high degree

of reliability, for example in medical de-

vices or other systems that may directly or

indirectly impact human life. When using

the device in computer and other systems

that demand a greater degree of reliability

than wireless networks, be sure to take all

necessary precautions to ensure safety and

prevent malfunction.

• Use only in the country in which the device was

purchased. This device conforms to regula-

tions governing wireless network devices

in the country in which it was purchased.

Observe all location regulations when us-

ing the device. FUJIFILM does not accept

liability for problems arising from use in

other jurisdictions.

• Wireless data (images) may be intercepted by

third parties. The security of data transmit-

ted over wireless networks is not guaran-

teed.

• Do not use the device in locations subject to

magnetic  elds, static electricity, or radio

interference. Do not use the transmitter in

the vicinity of microwave ovens or in other

locations subject to magnetic ﬁ elds, static

electricity, or radio interference that may

prevent reception of wireless signals. Mu-

tual interference may occur when the trans-

mitter is used in the vicinity of other wire-

less devices operating in the 2.4GHz band.

• The wireless transmitter operates in the 2.4GHz

band using DSSS and OFDM modulation.

Wireless Network Devices: Cautions

• This device operates on the same frequency as

commercial, educational, and medical devices

and wireless transmitters. It also operates

on the same frequency as licensed trans-

mitters and special unlicensed low-voltage

transmitters used in RFID tracking systems

for assembly lines and in other similar ap-

plications.

• To prevent interference with the above devices,

observe the following precautions. Conﬁ rm

that the RFID transmitter is not in operation

before using this device. Should you ob-

serve that the device causes interference in

licensed transmitters used for RFID tracking,

immediately stop using the aﬀ ected fre-

quency or move the device to another loca-

tion. If you notice that this device causes

interference in low-voltage RFID tracing

systems, contact a FUJIFILM representative.

2.4DS/OF4

This sticker indicates that

this device operates in

the 2.4 GHz band using

DSSS and OFDM modula-

tion and may cause inter-

ference at distances of up

to 40m.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm XQ2 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fujifilm XQ2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info