617605
30
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
Troubleshooting
Troubleshooting
Should an error occur, rst check the following points. If the distortion is still not eliminated,
the monitor should, if possible, be checked on another compute r.
If you are unable to solve the problem, please inform our help desk.
Having this problem? Check the following points:
No screen display
Check whether the ON/OF F switch on the
monitor is switched on.
Check whether the power cable
on the
monitor is connected correct
ly.
Check whether the computer is switched on.
No screen display
Power indicator is lit
Check whether the computer is switched on.
Check whether the data cable for the
monitor is correctly attached to the m onitor
port on the computer.
Press any key on the computer keyboard.
The computer may be in p ower saving
mode.
Alter the brightness and/or contrast until you
get a picture.
Message: No Signal
Check whether the data cable for the
monitor is correctly attached to the m onitor
port on the computer.
Check whether the computer is switched on.
Message: Frequency out of range:## kHz
/ ## HzPlease change the display mode
to 1920 x 1200 with 60 Hz
The input signal (horizontal frequency and
refresh rate) at the displayed input does not
correspond to the technical data for the monitor.
Adjust the video frequency range using the
computer software (see d ocumentation for
the computer or display adapter).
Set a different screen re
solution using the
computer software (see d
ocumentation for
the computer or display
adapter).
Picture position not cor
rect
The monitor recognises an undened mode (see
chapter "
Technical data", Page 25).
Press the
EXIT / AUTO
button to perform
auto-adjustment of the screen.
Picture is shaking
Check whether the data cable for the
monitor is correctly attached to the m onitor
port on the computer.
Press the
EXIT / AUTO
button to perform
auto-adjustment of the screen.
Picture is wrongly adjusted Press the
SELECT / MENU
button to
activate the Factory Recall function.
The Auto Processing message appears.
22 A26361-K1334-Z220-1-7619, edition 1
30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fujitsu B24W-5 ECO wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Fujitsu B24W-5 ECO

Fujitsu B24W-5 ECO Bedienungsanleitung - Deutsch - 36 seiten

Fujitsu B24W-5 ECO Bedienungsanleitung - Holländisch - 36 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info