560273
57
Zoom out
Zoom in
Vorherige Seite
1/85
Nächste Seite
Connecting external devices
Connecting an external monitor
Externalmonitor:
You can connect an external monitor to the notebook’s VGA or DVI port. Information
about the resolutions supported by the graphics card of your notebook can be found
in the "Technical Data" chapter in the EasyGuide.
You c an use a key com bination to switch back and forth betw een the external monitor and
the notebook?s LC D screen. More information ab out the device-specic key combinations
can be found in "Key combinations" in the EasyGuide.
Connecting an external moni
tor to the notebook
Switch off the notebook and the external monitor.
Connect the data cable of the e
xternal monitor directly to the VGA port
or the DVI port of the notebook
.
First switch on the monitor and then t he notebook.
When the notebook is connected to a Port Re plicator, the operating system creates
a hardware prole for the "Docked" mode. In this prole, a setting is saved which
indicates the last screen that was used for output. This prole is loaded when ever
the notebook is connected to a Port Replicator of the same type.
Setting the refresh rate for your external monitor
The re fresh rate must be correctly set so that the image does not icker.
Windows XP:
To do this, select the monitor type in the menu Start - (Settings) - Control Panel - Appearance and
Themes - Display - Settings - Advanced - Display.
Adjust the refresh rate and then click on Apply.
Windows Vista:
Set the appropriate refresh rate for the connected monitor type.
Select Start (Settings) Control Panel Appearance and personalization Personalization:
Adjust screen resolution.
or
Right-click on the desktop. C lick on Personalize Display Settings and select m onitor type 1
or 2.
Select Advanced Settings Monitor.
Select Screen Refresh Rate to choose the optimum refresh rate for the connected monitor type.
Click Apply and OK.
If the refresh rate set is t
oo high, the monitor may be damaged . Please see the
documentation included w
ith your monitor for the maximum possible refresh rate.
A26391-K200-Z226-1-7619 , edition 2 47
57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fujitsu CELSIUS Mobile H250 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Fujitsu CELSIUS Mobile H250

Fujitsu CELSIUS Mobile H250 Bedienungsanleitung - Deutsch - 86 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info