560275
75
Zoom out
Zoom in
Vorherige Seite
1/85
Nächste Seite
Troubleshooting and tips
Previous boot incomplete - Default conguration
used Due to an error during the previous syste m
boot, default values were used for certain
settings. Check the settings in the BIOS Setup.
Press the
F1
function key when prompted
to do so.
Real Time clock error
Please contact your sales outlet or our
customer service centre.
nnnnK Shadow RAM failed at offset: xxxx Failing
Bits: zzzz
Please contact your sales outlet or our
customer service centre.
System ba ttery is dead - Replace and run SETUP
Please contact your sales outlet or our
customer service centre.
System cache error - Cache disabled
Please contact your sales outlet or our
customer service centre.
System timer error
Please contact your sales outlet or our
customer service centre.
Restoring the hard disk contents under Windows
Harddisk:Operatingsystem
,restoring
You can reinstall the operating system with the "Windows Recovery CD" and
the "Drivers & Utilities" CD/DVD.
The instructions are provided on the case of the Recovery CD.
During the reinstall process your personal les and any installed programs
will be deleted. We advise you to backup your les to an external hard
drive, or CD / DVD disk before you start.
Switch the notebook on.
The following display br
iey appears on the screen during start-up:
<ESC>Diagnostic screen <F12>Boot Menu <F2>BIOS Setup
When this message appear
s, press the function key
F12
.
Insert the "Windows Recovery CD" into the optical drive.
Select CD-ROM and press th
e Enter key.
Follow the instructions on the screen.
After the installation you
must install all the drivers again. Some installed hardware
components will not be corr
ectly supported until this has been done.
Insert the "Drivers & Utilities" CD/DVD into the optical drive. The C D starts automatically.
Click on the Desk Update but
ton.
Select Automatic driver installation (Express) and click on Star t installation.
Follow the instructions on t
he sc reen.
Restart your notebook when the driver installation is completed.
A26391-K200-Z226-1-7619 , edition 2 65
75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fujitsu CELSIUS Mobile H270 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Fujitsu CELSIUS Mobile H270

Fujitsu CELSIUS Mobile H270 Bedienungsanleitung - Deutsch - 86 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info