ITEM LEVEL
The item level is the middle level of the tree structure. Enter the item level by
pressing the ITEM/(LF) button when the display shows “FUNCTN:” followed with
the name of a function (such as “STYLE” or “INTRFCE”).
When the printer is in the item level of setup mode, the display will show the name
of an item (such as “QUALITY:” or “LANGUAGE:”) followed with the name of a
selectable option (such as “LETTER” or “DRAFT”).
As shown in the previous flowchart and explained in the following paragraphs,
there are multiple items you may select in the STYLE and INTRFCE function. In
the remaining five functions you select a action (SAVE,LIST,SELF TST,HEX
DUMP,and DEFAULT).
STYLE FUNCTION SELECTIONS
When the display shows “FUNCTN :STYLE” and the ITEM button is pressed, the
printer enters the Function “STYLE”.
To move from item to item in this function, press the ITEM/(LF) button. The
Display will show the next item and its current selection.
Example When “QUALITY:LETTER” shows in the display, it means that under the
item “QUALITY”, the current selection is “LETTER”.
To change the current selection, press the SELECT/(RESET) button until the
selectable option you want to select is displayed, then press the ITEM/(LF) button,
your selection is set until power to the printer is turned off (unless the selection
has been saved, see paragraph 3.9). The next item is shown on the display.
If a switch other than the SELECT/(RESET) button is used, parameters cannot be
changed. Don’t forget to return the parameters to the original values when you
operate the SELECT/(RESET) button by mistake or for other than the purpose of
changing parameters, that, for checking what kinds of parameters are contained
in an item.
The following chart provides an explanation of the items and selectable options in
the STYLE function:
