HEX DUMP FUNCTION
When the display shows “FUNCTN :HEX DUMP” and either the ITEM/(LF) or
SELECT/(RESET) button is pressed, the printer will enter its HEX DUMP mode
and the display will show “HEX DUMP :READY”. All subsequent data, sent to the
printer, will be printed in hexadecimal and the display changes to “HEX
DUMP:BUSY”. One print line contains values for 16 characters.
If, during the HEX DUMP printing operation, either the ITEM/(LF) or
SELECT/(RESET) button is pressed, the display shows “===PAUSE===” and the
printer will stop printing.
If either the ITEM/(LF) or SELECT/(RESET) button is pressed when
“===PAUSE===” is displayed, the Hex dump printing will continue.
Press the FUNCTION/(FF) button to return to FUNCTN LEVEL.
DEFAULT FUNCTION
When the display shows “FUNCTN :DEFAULT” and either the ITEM/(LF) or
SELECT/(RESET) button is pressed, the display will briefly show “Setting
Default!”, and then show “FUNCTN :DEFAULT”. During this operation the printer
sets all currently selected options to the factory default settings.
Press the FUNCTION/(FF) button to return to the FUNCTN level.
NOTE:
Following parameters are not changed and remain by this function.
-Emulation
-Left end position offset
-TOF offset
-Interface settings
