617415
31
Zoom out
Zoom in
Vorherige Seite
1/69
Nächste Seite
Operation
Switching off the device
Shut down the operating system in the proper way. In Windows: from the
Start menu select the Shut Down option.
Device,Monitor,
If the operating system does not automatically switch the device into energy-saving mode or
switch it off, press the ON/OFF switch. Warning, this could lead to a loss of data!
If the d evice is switched off, it consumes a minimum of energy.
The ON/OFF switch does not disconnect the device from the mains voltage. To
completely disconnect the mains voltage, remove the power plug from the power socket.
If necessary, switch the monitor off (see the ope rating manual for the monitor).
Activating power saving mode (FUJITSU Thin
Client FUTRO on ly)
Due to customer re
quirements a nd requirements of t he operating system, the
"Wake-on-LAN" (W
oL) function is switched on by default. With the WoL function,
the power draw in O
FF mode increases slightly.
To meet the requi
rements of EC regulation 1275/2008 regarding th e implementation of the
Ecodesign direc
tive (2009/125/EC), the defa ult WoL setting must be changed as follows:
To start the BI
OS Setup Utility after system boot, press function key
F2
or the
Del
key.
In the Power sub-menu, select the Low Pow er Soft Off setting and switch it to enabled.
To save the set
ting and exit the BIOS Setup Utility, press function key
F4
.
After making this chan ge, the system will achieve the lowest energy
saving mode during shut-down.
In this st at
us, the “Wake-on-LAN” function can no longer be used.
Open BIOS Setup
BIOS-Setup
When the system starts, press the
F2
key (several times if necessary).
BIOS Setu
p will be started. Select one of t he tabs to access other setting options in BIOS Setup.
PXE system boot
PXEsystem boot
SwitchthedeviceonwiththeON/OFFswitch.
When s
tarting the system, press the
F12
key several times.
The boot menu is displayed.
Sele
ct the desired boot option.
Fujitsu 27
31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fujitsu FUTRO S920 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Fujitsu FUTRO S920

Fujitsu FUTRO S920 Bedienungsanleitung - Deutsch - 69 seiten

Fujitsu FUTRO S920 Bedienungsanleitung - Holländisch - 68 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info