617191
57
Zoom out
Zoom in
Vorherige Seite
1/91
Nächste Seite
Security functions
Removing passwords
To remove a password (without setting a new password) perform the following steps:
PasswordSupervisorpasswordUserpassword
Start the BIOS Setup Utility and go to the Security menu.
Highlight the Set Supervisor Password or Set User Password eld and press the Enter key.
Yo u will be requ ested to enter the current password by t he Enter Current Password prompt.
Yo u will be requested to enter a new password by the Enter New Password prompt.
Press the Enter key twice.
In the Exit menu, select the option Save Changes & Exit.
Select Yes and press the Enter key.
The notebook will now reboot with the password removed.
With the supervisor password you simultaneously deactivate the user password.
Password protectio
n for booting of the operating system
With the supervisor password that you set in the BIOS Setup Utility (see
section "
Setting the supervisor and user passwords", Page 52), you can
also preve nt booting of the operating system.
Operating system
Activating system protection
Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
Select the PasswordonBootoption and press the Enter k ey.
Select the desired option (Disabled, First Boot or Every Boot) and press the Enter key
Select the Save Changes & Exit option under Exit.
The notebook reboots. You are prompted to enter you r password (the supervisor p assword).
Deactivating system protection
Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
Select the PasswordonBootoption and press the Enter k ey.
Select the Disabled option and press the Enter key.
If you do not want to change any other settings, you can exit BIOS Setup Utility.
Select the Save Changes & Exit option under Exit.
The noteboo k will reboot. The system is no longer password-protected.
HDD password pro tection
After a
supervisor password has been set additionally a HDD password can
be set i
ntheHard Disk Security menu.
The ha
rd disk is locked with this password. Data on the locked disk can’t be read in
anoth
er syste m unless the correct HDD password is entered.
Fujitsu 53
57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

fujitsu-lifebook-e544

Suche zurücksetzen

  • Mein LifeBook macht während der Bedienung abwechselnd laute Lüftungsgeräusche um danach wieder geräuschlos zu sein Eingereicht am 24-5-2022 12:38

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fujitsu LIFEBOOK E544 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Fujitsu LIFEBOOK E544

Fujitsu LIFEBOOK E544 Bedienungsanleitung - Deutsch - 94 seiten

Fujitsu LIFEBOOK E544 Bedienungsanleitung - Holländisch - 94 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info