Bedienungsanleitung Fujitsu LifeBook E8010 (Seite 28 von 124) (Englisch)

574840

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

LifeBook E8000 Notebook

Figure 2-19 LifeBook Security/Application Panel

LifeBook Security/

Application Panel

A unique feature of your LifeBook notebook is the

Security/Application Panel that allows you to secure your

notebook from unauthorized use. The Security/Applica-

tion Panel also allows you to launch applications with the

touch of a button when your system is on.

If the security system is activated, upon starting your

notebook or resuming from suspend mode the security

system requires you to enter a password code using the

buttons on the Security/Application Panel. After entering

a correct password, your notebook resumes system

operation. (Figure 2-19)

SETTING UP YOUR

LIFEBOOK SECURITY PANEL

When you receive your LifeBook notebook, the security

panel application is pre-installed without any passwords.

The following sections provide detailed information on

your security panel, and how to set, change or remove

passwords.

Numbered Buttons

Use these buttons to enter your password.(Figure 2-19)

Enter Button

After entering the button strokes, push this button to

enter the password into the LifeBook notebook.

(Figure 2-19)

PASSWORDS

The user and supervisor password may be set on this

notebook. A supervisor password is typically the same

for all LifeBook notebooks in a working group, office, or

company to allow for system management. Individual

LifeBook notebooks in a group environment should not

use a common password. A password consists of one to

five button strokes plus the enter button. A valid stroke

consists of pushing one or up to four buttons simulta-

neously. The following are valid button strokes:

Pushing [4] by itself

Pushing [2] and [3] at the same time

Pushing [1], [2], and [4] at the same time

Pushing [1], [2], [3], and [4] at the same time

The following are valid passwords. The numbers

within braces ({ }) are button strokes using more

than one button.

{[2]+[3]}, [1], [enter]

[4], [enter]

{[1]+[3]}, {[2]+[3]+[4]}, [1], [4], [2], [enter]

Setting Passwords

When shipped from the factory, no passwords are set.

You have a choice of having no password or setting a

supervisor and user password. You must set the super-

visor password before the user password.

Setting Supervisor Password

You must have set a supervisor password before setting

any user passwords. The supervisor password can bypass

the user password.

* Security/Application Launcher

buttons (for entering passwords

and launching applications)

Enter button

Button 1*

Button 2*

Button 3*

Button 4*

The purpose of supervisor password is

to be able to bypass the user password

in case the user password is forgotten.

The supervisor password alone will not

lock the system.

You have to set both the supervisor

and user passwords for the security

panel to work.

E Series.book Page 20 Friday, May 14, 2004 1:25 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujitsu LifeBook E8010 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info