Bedienungsanleitung Fujitsu LifeBook E8010 (Seite 59 von 124) (Englisch)

574840

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

User Installable Features

Figure 4-17. Connecting a Parallel Device

SERIAL PORT

The serial port, or COM port, located on the system and

on the optional Port Replicator allows you to connect

serial devices, such as printers or scanners. In order to

connect a serial interface device follow these easy steps:

1. Align the connector with the port opening.

2. Push the connector into the port until it is seated.

3. Tighten the two hold-down screws, located on each

end of the connector.

PS/2 PORT

The PS/2 port located on the system and on the optional

Port Replicator allow you to connect an external

keyboard or mouse. In order to connect a PS/2 interface

device follow these easy steps:

1. Align the connector with the port opening.(Figure 4-

18)

2. Push the connector into the port until it is seated.

Figure 4-18. Connecting a PS/2 Device

DOCKING PORT

The docking port is used for the connection of your

notebook to an optional port replicator or docking

station. In order to connect your notebook to one of

these devices follow the instructions that came with your

docking port. (See figure 2-8 on page 11 for location)

UNIVERSAL SERIAL BUS PORTS

The Universal Serial Bus 2.0 ports (USB) allow you to

connect USB devices such as external game pads,

pointing devices, keyboards and/or speakers.

In order to connect a USB device follow these steps:

1. Align the connector with the port opening.(Figure 4-

19)

2. Push the connector into the port until it is seated.

Figure 4-19. Connecting a USB Device

INFRARED PORT

The Infrared IrDA (4Mbps) port allows for wireless data

transfer between your notebook and other IrDA-

compatible devices, such as another computer or a

printer, without the use of a cable. (See figure 2-4 on

page 7 for location)

It is important to keep in mind that while carrying out

this form of communication, both devices must be

placed so their infrared ports are directly facing each

other without obstruction. The devices must also be

separated by at least 6" but no more than 36" for

maximum performance.

The following conditions may interfere with infrared

communications:

■

A television, radio remote control unit, or a wireless

headphone is being used nearby.

■

Direct sunlight, fluorescent light, or incandescent light

shines directly on the port.

A mouse or keyboard may be installed and

automatically recognized by your note-

book without restarting or changing set-

ups.

Due to the ongoing changes in USB tech-

nology and standards, not all USB devices

and/or drivers are guaranteed to work.

■

Do not move either device while com-

munication is active as it may interrupt

data transmission.

■

Be careful not to scratch the infrared

port lens. Dirt, scratches, or other sur-

face marks can degrade operation.

E Series.book Page 51 Friday, May 14, 2004 1:25 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujitsu LifeBook E8010 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info