Bedienungsanleitung Fujitsu LifeBook E8010 (Seite 113 von 124) (Englisch)

574840

113

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

105

WIreless LAN User’s Guide

3. Click the [Sharing] tab.

4. Click [Share this printer].

5. Enter the sharing printer name in [Share name].

6. Click the [OK] button.

Confirming connection

After you have finished the network setup operations,

access the folder whose sharing has been set for other

personal computers. Also, confirm the status of the radio

waves in case of trouble such as a network connection

failure.

Connecting your personal computer to another

personal computer

1. Click [Start] first and then [My Computer]. The

[My Computer] window will be displayed in the left

frame.

2. Click [My Network Places] in the “Other Places”

list. The window [My Network Places] will be dis-

played.

3. Click [View workgroup computers] under Network

Tasks in the left frame.

4. Double-click the personal computer to which your

personal computer is to be connected. The folder

that was specified in “Setting the file-sharing func-

tion” on page 104 will be displayed.

5. Double-click the folder to be accessed.

Confirming the status of the radio

1. Right-click the Intel PRO Wireless icon in the lower

right corner of the screen.

2. Click [Open Intel PROSet for Wireless]. The Intel

PROSet for Wireless window opens.

3. Contained within the General tab and the Details

section (accessed by pressing the [Details] button),

you will find the current operating status of the

radio. (When the radio is turned off or the com-

puter is not yet connected, some of the conditions

will not be displayed.)

■

Network Name (SSID)

Displays the Network Name (SSID) currently

used by the radio.

■

Profile Name

The current configuration profile is displayed.

■

Mode

Displays the current operating mode. [Infra-

structure (AP)] or [Ad Hoc] will be displayed.

■

Security

Displays the current security status of the profile

being used:

None: No encryption used.

WEP: WEP encryption algorithm used.

CKIP: WEP encryption algorithm used.

TKIP: WEP encryption algorithm used.

■

Speed

Displays the highest data rate of the associated

access point in mega-bits-per-second (Mbps)

until data transfer occurs.

802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, or

54.

802.11b: 1, 2, 5.5, or 11.

■

Band (Frequency)

Displays the current band and frequency being

used. Displays Out of Range if no band and

frequency is displayed. Displays:

802.11g (2.4 GHz) or 802.11b (2.4 GHz)

■

Channel

Displays the current transmit and receive

channel being used.

■

802.1x Protocol

Displays Enabled if the profile uses 802.1x

authentication. Default is Disabled.

In the case of access point (infrastructure)

connection, enter the necessary data for

the access point before confirming

connection. Refer to the manual of the

access point for the access point setup

procedure.

E Series.book Page 105 Friday, May 14, 2004 1:25 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujitsu LifeBook E8010 Seite 113

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info