574835
63
Zoom out
Zoom in
Vorherige Seite
1/104
Nächste Seite
Security functions
Protecting BIOS Setup Utility (supervisor and user password)
If you have opened these operating instructions on the screen, we
recommend that you print them out. You cannot call th e instructions onto
the screen w hile you are setting up the password.
BIOSSetupUtility
The supervisor password and the user password both p revent unauthorised use of the
BIOS-Set up-Utility. W ith the aid of the supervisor passw ord you can access all of the functions of
the BIOS-Setup-Utility, while the user password will only give you access to some of the fu nctions.
You c an only set up a user password if a supervisor password has already been a ssigned.
Please refer to section "Settings in BIOS Setup Utility", Page 80 for a description
of how to call up and operate the BIOS-Setu p-Utility.
Setting supervisor and user password
Start the BIOS Setup
Utility and go to the Security menu.
Select the Set Supervisor Password eld and press the Enter key.
With Enter new Pass
word: you are asked to enter a password.
Enter the password and press the Enter key.
Conrm new Passwo
rd requires you to conrm the password.
Enter the passwo rd again and press the Enter key.
Changes have be
en saved is a conrmation that the new password has been saved.
To set the user password, select Set User Password and proceed exactly as
when conguring the supervisor password.
Ifyoudonotwa
nt to change any other settings, you can exit BIOS Setup U til ity.
In the Exit menu, select the option Save Changes & Exit.
Select Yes an
d press the Enter key.
PasswordSupervisor passwordUserpassword
The notebook will be rebooted and the new password will come into effect. It will now be
necessary to rst enter your supervisor or user password in order to open the BIOS Setup Utility.
Please note that the user password only provides access to a few of the BIOS settings.
Changing t
he supervisor or user password
You can only change the supervisor password when you have logged into the
BIOS Se tup Utility with the supervisor password.
Passwo
rd
Superv
isorpassword
Userpa
ssword
Call the BIOS Setup Utility and g o to the Security menu.
When cha
nging the password, proceed exactly as for password assignment.
Fujitsu 59
63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fujitsu LIFEBOOK S752 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Fujitsu LIFEBOOK S752

Fujitsu LIFEBOOK S752 Bedienungsanleitung - Deutsch - 105 seiten

Fujitsu LIFEBOOK S752 Bedienungsanleitung - Holländisch - 108 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info