617180
54
Zoom out
Zoom in
Vorherige Seite
1/81
Nächste Seite
Removing and installing com po nents
during servicing
Preparing to remove components
If you are going to remove or change system components, prepare for the removal as fo llows:
Please observe the safety information in chapter "Important notes", Page 12.
Remove the power plug from the mains o utlet !
Switch the device off.
The device must not be in energy-saving mod e !
Close the LCD screen.
Remove all the cables
from t he device.
Turn the device over and place it on a stable, at and clean surface. If necessary, lay an
anti-slip cloth on this surface to pre vent the device from being scratched.
Rem ov e the battery
(see "
Removing the battery", Page 30).
Installing and removing memory expansion
MemorymoduleMainmemoryRemovingmemor
y
Systemexpansi
on
Systemexpansi
on
If you are asked by the Hotline/Service Desk to r emove and install the memory
expansion y ourself, proceed as follows:
Please observe the safety information in chapter "Important notes", Page 12.
When installing/removing mem ory modules, the battery must be removed from
the notebook and the notebook must not be connected to the power supply,
see "
Preparing to remove components", Pag e 50.
Only use m emory expansion modules that have been approved for your
notebook (see "
Technical data", Page 66).
Never use force when installing or removing a mem ory extension.
Make sure that foreign objects do not fall into the memory extension compartment.
You m ust open the service compartment to remove or install a memory module. On some devices,
opening the compartment may expose other components. These components should be removed
and replaced only by authorised specialists. Therefore, be sure to observe the following:
Individual components can become very hot during operation. Therefore, we
recommend that you wait one h our af ter switching off the notebook before removing
or installing memory modu les. Otherwise, there is a risk of suffering burns!
As some components are exposed that are sensitive to static electricity, please take
note of chapter "
Notes on installing and removing b oards and components", Page 49.
50 Fujitsu Technology Solutions
54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fujitsu LIFEBOOK SH531 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Fujitsu LIFEBOOK SH531

Fujitsu LIFEBOOK SH531 Bedienungsanleitung - Deutsch - 85 seiten

Fujitsu LIFEBOOK SH531 Bedienungsanleitung - Holländisch - 86 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info