Bedienungsanleitung Fujitsu LifeBook T4220 Tablet PC (Seite 34 von 136) (Englisch)

510508

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Getting to Know Your Tablet PC

SETTING UP LIFEBOOK SECURITY PANEL

When you receive your Tablet PC, the security panel

application is pre-installed without any passwords. The

following sections provide detailed information on your

security panel, how to set, change or remove passwords.

Numbered Buttons

Use these buttons to enter your password.

Enter Button

After entering the button strokes, push this button to

enter the password into the Tablet PC.

PASSWORDS

The user and supervisor password may be set on this

Tablet PC. A supervisor password is typically the same

for all tablets and notebooks in a work group, office, or

company to allow for system management. Individual

computers in a group environment should not use a

common password. A password consists of one to five

button strokes plus the enter button. A valid stroke

consists of pushing one or up to four buttons simulta-

neously.

The following are valid button strokes:

■

Pushing [4] by itself

■

Pushing [2] and [3] at the same time

■

Pushing [1], [2], and [4] at the same time

■

Pushing [1], [2], [3], and [4] at the same time

The following are valid passwords. The numbers within

braces ({ }) are button strokes using more than one

button.

■

{[2]+[3]}, [1], [Enter]

■

[4], [enter]

■

{[1]+[3]}, {[2]+[3]+[4]}, [1], [4], [2], [Enter]

Setting Passwords

When shipped from the factory, no passwords are set.

You have a choice of having no password or setting a

supervisor and user password. You must set the super-

visor password before the user password.

Setting Supervisor Password

You must have set a supervisor password before setting

any user passwords. The supervisor password can bypass

the user password.

1. Go to the Start menu.

2. Click on Run.

3. Type in: C:\Program

Files\Fujitsu\Security Panel

Application\Supervisor\ FJSECS.EXE,

then press [Enter]

4. Follow the on-screen instructions to set the Super-

visor password.

Setting User Password

1 Go to the Start menu.

2. Click on All Programs.

3. Click on Security Panel Application -> Security

Panel Application.

4. Follow the on-screen instructions to set the user

password

USING YOUR LIFEBOOK SECURITY PANEL

The security lock feature is in effect both when the system

resumes from Off, Standby, or Hibernation state. You

always need to push the Security Panel buttons to input

the user password. Your system will not begin the boot

sequence until you enter your supervisor/user password.

From Off State

1. Turn on your system.

2. When the Security Indicator flashes, enter the pass-

word and press Enter button (e.g., if the password is

22222, first press Button 2 five times, then press the

Enter button). The Tablet PC will boot to normal

operation.

From Standby/Hibernation State

1. Press your Suspend/Resume button.

2. When the Security Indicator flashes, enter the pass-

word and press Enter button.

The Tablet PC should resume normal operation.

Incorrect Password Entry

If an invalid supervisor or user password is entered three

times in succession, the system will “beep” for about one

minute. If a valid password is entered within a minute

(while system beeps), the beeping will stop and the

Tablet PC will resume normal operation. If no password

is entered or an invalid password is entered while the

system beeps, the system will return to its previous

locked state (standby or off) and the Security Indicator

will go off. To reactivate the Tablet PC after a password

failure, you must press the Suspend/Resume button,

then enter a correct password

• The purpose of supervisor password is

to be able to bypass the user password

in case the user password is forgotten.

The supervisor password alone will not

lock the system.

• You must set the supervisor and user

passwords for the security panel to

work.

You may change or remove the supervisor

or user password by repeating the steps

defined above.

T Series.book Page 25 Wednesday, April 25, 2007 11:29 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujitsu LifeBook T4220 Tablet PC Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info