574820
68
Zoom out
Zoom in
Vorherige Seite
1/108
Nächste Seite
Security functions
Password prote ction for the hard disk
Passwordprotect ion:
The had disk password prevents unauthorised access to the hard disk drives
and is checked internally each time the system is booted. The condition for this
is that you have assigned at least the supervisor password.
Activating hard disk protection
Call up the BIOS Setup and select the Security menu .
If you have not assigned BIO S passwords yet, dene the supervisor and the user
password now, if desired (see "
Securit y functions", Page 59).
Mark the H ard Disk Security eld and press the Enter key.
In the Drive0 area mark the Set Master Password eld and press the Enter key.
Enter new Password then appears and you are asked to enter a passwo rd.
Ente r the password and press the Enter key.
Conrm new Password requires y ou to conrm the password.
Enter the pa ssword again and press the Enter key.
Setup Notice: Changes have been saved is displayed to conrm that the
new password has been saved.
To assign the password for the second hard disk (Drive1), go to the Drive1 area and
select the eld Set Master P assw o rd, then proceed in exactly the same way as f or
setting up the password for the rst hard disk (Drive0).
The eld Password Entry on Boot is set to Enabled by default. You c an exit the BIOS
Setup once you have nished changing the settings.
From the Exit menu, choose the option Exit Saving Changes.
Press the Enter key and select Ye s .
The notebook reboots and your hard disk is now protected with a password. T he system
will ask you to enter the password when the noteb ook is restarted again.
Deactivating hard disk protection
To cancel a password without setting a new one, proceed as follows:
Call up the BIOS Setup and select the Security menu .
Mark the H ard Disk Security eld and press the Enter key.
In the Drive0 area mark the Set Master Password eld and press the Enter key.
You will be initially requested to enter the old password by the Enter current Password prompt.
You will then be requested to enter a new password by the Enter new Password pro m pt.
Afte r entering the passw ord, press the Enter key three times.
From the Exit menu, choose the option Exit Saving Changes.
Press the Enter key and select Ye s .
The notebook reboots, and password protection for the hard disk is cancelled.
To cancel the password for the secon d hard disk (Drive1), go to the Drive1 area
and select the eld Set Master Password, then proceed in exactly the same way as
for cancelling the password for the rst hard disk (Drive0).
64 Fujitsu
68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

fujitsu-lifebook-t904

Suche zurücksetzen

  • Wie schalte ich beim T937 die Tastaturbeleuchtung ein?
    Eingereicht am 23-2-2019 00:51

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fujitsu LIFEBOOK T904 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Fujitsu LIFEBOOK T904

Fujitsu LIFEBOOK T904 Bedienungsanleitung - Deutsch - 115 seiten

Fujitsu LIFEBOOK T904 Bedienungsanleitung - Englisch - 121 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info