Bedienungsanleitung Fujitsu STYLISTIC Q702 (Seite 29 von 100) (Englisch)

560258

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Working with the Tablet PC

Touchscreen

Tou chs cr ee nNotes

High-quality TFT displays are installed in Tablet PCs from Fujitsu Technology Solutions GmbH. For

technical reasons, TFT monitors are manufactured for a speciﬁc resolution. An optimal, clear

picture can only be ensured with the correct resolution intended for the relevant TFT monitor. A

monitor resolution which differs from the speciﬁcation can result in an unclear picture.

The screen resolution of your Tablet PC’s touchscreen is optimally set at the factory.

The standard of production techniques today cannot guarantee an absolutely fault-free screen

display. A few isolated constant lit or unlit pixels (picture elements) may be present. The maximum

permitted number of pixels faults is stipulated in the international standard ISO 9241-3 (Class II).

Example:

A monitor with a resolution of 1280 x 800 has 1280 x 800 = 1024000 pixels. Each pixel consists of

three subpixe ls (red, green and blue), so there are almost 3 m illion subpixels in total. According to

ISO 9241 -3 (class II), a maximum of 2 light and 2 dark pixels and an additional 5 light or 10 dark

subpixels or a corresponding mix may be defective (1 ligh t subpixel counts as 2 dark subpixels).

Pixel

A pixel consists of 3 subpixels, normally red, green and

blue. A pixel is the smallest element that can be generated

by complete functionality of the display.

Subpixel

A su bpixel is a separately addressable internal structure

within a pixel that enhances the pixel function.

Cluster A cluster contain

s two or more defective pixels or

subpixels in a 5 x

5 pixel block.

Background l igh ting

TFT monitors are operated with background lighting. The luminosity of the

background lighting can decrease while the Tablet PC is in use. However, you

can set the brightness of your monitor individually.

Ambient light senso r

If your notebook was shipped with the Windows operating system, the screen brightness is

regulated by means of the ambient light sensor and depending on the respective light conditions.

This results in optimum readability and longer battery life at the same time.

If your notebook was shipped with W indows 8, the adaptive brightness setting is deactivated. To

change the ambient light sensor settings, select Control Panel - System and Security - Power Options -

Change pla n settings - Change advanced power settings - Display - Activate adaptive brightn ess setting..

Select On to activate the adaptive brightness setti ng with the help of the ambient light sensor.

Synchronising the display on the touchscreen and an external monitor

In Windows 7, you can switch between touchscreen and external monitor, if you open

Control Panel - Windows Mobility Center, section External Display.

In Windows 8 wipe your ﬁnger over the screen from the right-hand edge. The setting Charms

- D evices - Second monitor opens. Select the desired output type.

You can also use the Fujitsu Displa y Manager in the Windows Mobility Center to set the output type.

Fujitsu 25

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujitsu STYLISTIC Q702 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fujitsu STYLISTIC Q702

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info