530568
20
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
20 EN
Note: Virtual Surround will not be effective if the sound
mode is set to something other than “STEREO” (for
Audio CDs only). (Refer to page 19.)
Turn down the level or turn it “OFF” if the sound is
distorted.
The setting will be saved even if this unit is turned off.
This function cannot be used during x1.3 and x0.8
Rapid Play with Voice. (Refer to page 18.)
Track Search
There are three ways to begin the playback of a specific track
on a disc.
Using the Number buttons
1) Press the Number buttons to enter the desired track
number.
Playback will start at the selected track.
For any discs, to play a single-digit track, press the
number directly (e.g. for track 3, press 3).
For the disc with less than 100 tracks, to play a double-
digit track, press +10, then the number (e.g. for track 26,
press +10, 2, 6).
For the disc with more than 100 tracks, to play a double-
digit track, press +10, 0, then the number of the track.
(e.g. for track 26, press +10, 0, 2, 6). To play a triple-
digit track, press +10, then the number of the track (e.g.
for track 126, press +10, 1, 2, 6).
Using SEARCH
1) Press SEARCH.
The Track Search display appears.
2) Within 30 seconds, select a desired track number using
the Number buttons.
Playback will start at the selected track.
For the disc with more than 10 but less than 100 tracks,
to play a single-digit track, press
0 first, then the number
of the track (e.g. for track 3, press 0, 3).
For the disc with more than 100 tracks, to play a single
or a double-digit track, press 0 first, then the number of
the track (e.g. for track 3, press 0, 0, 3 and for track 26,
press 0, 2, 6).
In any other cases, just press the number of the track.
Using SKIP H G
During playback, press SKIP G to move to the next track.
Press it repeatedly to skip subsequent tracks.
Press SKIP H to go back to the beginning of the current
track. Press it repeatedly to go back to the previous tracks.
Track number will appear briefly on the front panel
display.
•If SKIP H G are pressed while the playback is paused,
the playback will be paused again after skipping to the
next track.
During Dual Playback, using SKIP H G will only
affect MP3 tracks.
To skip JPEG files, use s or B. If the “SLIDE SHOW”
is set to “MUSIC”, SKIP H G are available for both
MP3 and JPEG files.
Note: SKIP H G are not available when playback is
stopped.
Chapter / Title Search
Using SEARCH
1) During playback, press SEARCH once for the Chapter
Search, twice
for the Title Search.
2) Enter the desired chapter/title number using the Number
buttons.
Using the Number buttons
1) During playback, press the Number buttons to enter the
desired chapter number.
Playback will start at the selected chapter.
For single digit chapters (1-9), press a single number
(e.g. to play chapter 3, press
3).
To play chapter 26, press +10, 2, 6.
Note: Depending on the disc being played, using
the Number buttons cannot be performed.
Using SKIP H G
During playback, press SKIP G to go to the next chapter.
Press it repeatedly to skip subsequent chapters.
Press SKIP H to go back to the beginning of the current
chapter. Press it repeatedly to go back to the previous chapter.
Time Search
1) During playback, press SEARCH repeatedly until the
Time Search screen appears on the TV screen.
2) Within 30 seconds, enter a desired disc time using
the Number buttons.
Playback will start at the specified time.
For DVDs, enter a desired time of the current title.
For Audio CDs and discs with DivX
®
files, enter a
desired time of the current track.
•Press CLEAR to erase the incorrect input.
Note: “0” appears automatically when there is no need to
enter a number. For example, “0:0_:_ _” appears in
the Time Search display if the total time of the disc or
track is less than 10 minutes.
Time Search is not available on some discs.
Marker Setup
Use markers to memorise your favourite places on a disc.
1) During playback, press SEARCH repeatedly until the
Marker Setup screen appears on the TV screen.
2) Press s or B to select 1, 2, 3, 4, 5, 6, 7, 8, 9 or 10 and
ensure that “_ _ _ _:_ _:_ _” appears in the display.
3) When the disc reaches the desired point, press ENTER.
The Title or Track and elapsed time will appear on the
TV screen.
4) To return to the marker later, press
SEARCH repeatedly
until the Marker Setup screen appears and s or B to
choose the desired marker, then press ENTER.
5) Press SEARCH or RETURN to exit.
Note: Opening the disc tray, turning off the power or
selecting “AC” at step
2) and press ENTER will erase all
markers.
To clear a marker, use s or B and select the marker
number to be cleared, and then press
CLEAR.
You can mark up to 10 points.
CD MP3 JPEG DivX
®
DVD-V
/29
DVD-V CD DivX
®
DVD-V CD
1:29:00
TOTAL
E8G06ED(EN).fm Page 20 Friday, July 27, 2007 8:51 PM
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Funai DPVR-4110 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Funai DPVR-4110

Funai DPVR-4110 Bedienungsanleitung - Holländisch - 32 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info