Bedienungsanleitung Funai LED22H800 (Seite 15 von 20) (Englisch)

503541

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

3 Press BACK to turn off the teletext decoder.

Common Interface (CI)

This unit is equipped with a CI slot. You can enjoy additional

services with this function, for example Pay TV. The access

restrictions menu will appear on the TV screen when a CI

module is installed.

1 Go to the standby mode and unplug from an AC outlet.

2 Insert the CI module straight to the CI slot of this unit.

3 Plug this unit into an AC outlet and press Q to turn on

the unit.

4 Press MENU to display the menu.

5 Use K / L to select [OTHERS], then press OK.

6 Use K / L to select [TV Settings], then press OK.

7 Use K / L to select [Common Interface], then press

OK.

8 Follow the instructions on the TV screen.

PC Settings

You can adjust the PC screen position, clock and phase.

Before you begin: You must connect your PC to this unit and

select [PC] at “Switching the Input Mode” (p. 8).

1 Use K / L to select [OTHERS], then press OK.

2 Use K / L to select [PC Settings], then press OK.

Auto Adjustment

3 Use K / L to select [Auto Adjustment], then press

OK.

• Auto adjust confirmation message will appear.

4 Use K / L to select [Adjust], then press OK.

• Each setting will be adjusted automatically.

Horizontal Position / Vertical Position / Clock / Phase

3 Use K / L to select the item you want, then press OK.

•Use K / L to change the items.

4 Use 0 / 1 to adjust the settings according to your

personal preference, then press OK.

FUN-LINK

This function allows you to operate the linked functions

between our brand devices with a FUN-LINK feature and this

unit connecting through an HDMI cable.

1 Use K / L to select [OTHERS], then press OK.

2 Use K / L to select [FUN-LINK], then press OK.

FUN-LINK Control

You can set the FUN-LINK function On or Off.

3 Use K / L to select [FUN-LINK Control], then press

OK.

• If you want to select other pages, use the Number buttons or

K / L.

• To enlarge fonts, press .

• To select the teletext subpages, press .

• To directly select the page numbers shown at the bottom of the

TV screen, use RED/GREEN/YELLOW/BLUE.

• To call up the hidden information, press .

• To hold the current page, press .

• To go back to the start page, press .

• To hide the teletext, press SLEEP.

• Some CI modules may be a two-piece design consisting of a card

reader with the viewing card. When using this kind of card, insert

the card reader firmly into the CI slot on the unit first. Then, insert

the viewing card into the reader.

• CI may not available in some countries or region.

• In case of failure, you need to call your CI service provider.

• Menu operations may vary depending on the viewing card. Refer

to the manual accompanying the viewing card.

DTV

• The set with FUN-LINK will interoperate without any problems

with other Funai devices which comply with FUN-LINK.

PC Settings

PICTURE

SOUND

CHANNEL

OTHERS

LANGUAGE

Auto Adjustment

Horizontal Position

Vertical Position

Clock

Phase

FUN-LINK

PICTURE

SOUND

CHANNEL

OTHERS

LANGUAGE

FUN-LINK Control

Auto Device Off

Auto TV On

Device Control

Device List

Off

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Funai LED22H800 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Funai LED22H800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info