Bedienungsanleitung Funai LED40H9200M (Seite 16 von 26) (Englisch)

503608

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Audio Type

You can adjust the audio type.

Use

to select [Audio Type], and then select [-],

[Hearing Impaired] or [Visually Impaired] using

Hearing Impaired:

Provides audio service for hearing impaired.

Visually Impaired:

Provides additional audio description for visually impaired.

Audio Description

You can adjust the audio output setting and volume for

[Visually Impaired].

After select [Visually Impaired], use K / L to select

[Audio Description], and then adjust the setting using

0 / 1.

●

After press OK and appear the mixing level display, you can adjust

it.

●

Only MPEG sound is available for this function.

TV Settings

You can select the country and audio language.

Use K / L to select [TV], then press OK.

BackSelect

English

Channel

Sub Audio Language

Main Audio Language

Country

Parental

Others

Sound

Picture

France

Country

You can set the country you want.

Use K / L to select [Country], and then select the

country you want using 0 / 1.

Main Audio Language / Sub Audio Language

DTV

You can select the main or sub audio language.

Use K / L to select [Main Audio Language] or

[Sub Audio Language], and then select each language

you want using 0 / 1.

Audio Channel

You can select the audio mode.

Use K / L to select [Audio Channel], and then select

[Stereo], [Mono], [Dual 1] or [Dual 2] using 0 / 1.

●

While watching a programme, you can change the audio language

easily using AUDIO when it is available.

Channel Settings

You can edit the channels.

Use K / L to select [TV], then press OK.

Use K / L to select [Channel], then press OK.

Back

Select

SearchChannel

Fine Tune

Channel Decode

Channel Edit

Channel Sort

Channel Skip

Update Scan

Manual Scan (DTV)

Manual Scan (ATV)

Auto Scan

Parental

Others

Sound

Picture

Auto Scan

You can scan the DTV and ATV channel in your area

automatically.

●

When the scanning is completed, the lowest memorised digital or

analogue channel will be displayed.

●

If you press MENU during the scanning, this operation will be

stopped and the lowest memorised channel will be displayed.

●

Please note that after tuning, the analogue channels will be stored

in the order that they are broadcasted by your local transmitter.

This may not be in the same order in which you would like them

to be stored. If this is the case, you can change the order according

to your preference at “Channel Settings” (p. 16).

Use K / L to select [Auto Scan] and then press OK

to start scanning.

Manual Scan (ATV)

You can search ATV channel manually in your area.

Use K / L to select [Manual Scan (ATV)], then press

OK.

Use K / L to select [Start Frequency (MHz)] for

selection of the 3-digit frequency using the Number

buttons.

Use K / L to select [Scan Up] or [Scan Down], and

then press OK to start scanning greater than or less

than the adjusted frequency.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Funai LED40H9200M Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Funai LED40H9200M

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info