Bedienungsanleitung Funkwerk CS410 (Seite 8 von 103) (Englisch)

68173

Zoom out

Zoom in

Vorherige Seite

1/103

Nächste Seite

Only use approved accessories.

Only terminals with SELV and/or which comply with ETS 300047 may be connectedto the unit.

This regulation is fulfilled when approved terminal devices are used as intended.

Plug-in power supply

Use only approved power plug-in units (DSA-0101F-05 UP or L15 D52 AB DDLAWO).

Do not use power plug-in units with visible defects or damage (fissures, cracks, etc.)

Elektrostatic charges (protection against electrostatic charges)

ThetelephoneissuppliedwithenhancedESDprotectionagainsttheeffectsof electrostatic discharge that exceeds the

protection level cited in the approval specification. Elevated ESD levels should nevertheless be avoided to the

greatest possible extent. In some cases, electrostatic discharge levels can far exceed the approval limits or the

resistance levels already implemented in your telephones. Eliminate the causes or conditions that promote these

elevated ESD levels, such as insufficient humidity or carpeting. The telephone manufacturer does not assume any

liability for damage caused under such circumstances.

Unpacking and placing the telephone

Unpacking

System telephone

Handset with handset connecting cord

2 feet

1 ISDN connecting cord, approx. 6 m (not with IP-S400)

· Cat.5connecting cord, approx. 2 m (only with IP-S400)

PC-Connection cable / USB cord , approx. 3 m (not with CS400 and IP-S400)

PC-audio cable, 3.5 mm stereo jack,approx. 2,5 m long (notwith CS400 and IP-S400)

Adapter cord for headset with a4 pin connectingcord (8pin/4 pin)

Cable holder (self-adhesive after removing the film) (notwith CS400)

Operating instructions and labels for function keys

Supplement with telephone safety instructions

WIN-Tools CD-ROM with:

Professional Configurator, telephone directory-, download- and sound manager,

TAPI-, USB-, CAPI- and NDISWAN driver, Adobe Acrobat Reader,

Operating instructions and Adobe Acrobat file for the printing of individual labels

Placing the telephone

Beforeinstallingthetelephoneyoumustmounttherearfeetforthetelephoneatthepositions(6)showninfigure1.

Please note that the feet of your telephone may leave marks on sensitive surfaces, such as furniture. The

manufacturer of the telephone is not liable for any such damage. Therefore, use appropriate non-skidding pads

under the phone.

Cleaning the telephone

The ISDN system telephone has been manufactured for normal, everyday use. When required, clean the ISDN

systemtelephone with a slightly moistened cloth, or with an anti-static cloth. Neveruse a solvent to clean the phone!

Never use a dry cloth; electrostatic charges could damage the electronics in the system. It is essential that no liquids

penetrate into the inside of the ISDN system telephone, as this could destroy the phone.

Connecting the telephone (connecting and handset cords)

Please connect the ISDN cable and the handset cable. Otherwise you will not be able to operate the phone.

Description and installation Safety notes

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Funkwerk CS410 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info