Bedienungsanleitung Funkwerk CS410 (Seite 11 von 103) (Englisch)

68173

Zoom out

Zoom in

Vorherige Seite

1/103

Nächste Seite

Assignment of the headset jack pins (CS400 / CS400 /CS400xt)

Microphone - (Ground)

Handset

Handset (ground)

Microphone +

Further settings when using a headset

You can use the handset or the headset for making calls. With headset operation, the following settings are required

or possible:

When configuring your telephone, program one of the function keys for headset operation (head

set button, see page 44).

You can use the headset connected to your system automat ically for certain actions on the phone

(see page 57).

If a special support feature is stored in your telephone for the headset your are using, set your

phone for that headset model (see page 48).

For example, the LED in the microphone extension for »Firefly F142 N« from Plantronics can be

activated by the telephone.

If you would like to use the auto-answer feature with your headset, set the time after which a call

is answered (see page 57). When configuring your telephone, you should program a function key

to be used for activating or deactivating the auto-answerfeature.

If you have configured your phone for automaticheadset use, you can poll the answering machi-

ne using the headset.

Connecting the telephone to a PC

Connecting the PC connection cable (USB)

Information:

Use the USB cord supplied with the system to connect the telephone to the PC, or to the hub. If you use a different

USB cord, ensure that the distance between the telephone and the PC, or between the telephone and the hub, does

not exceed five meters, depending on the type of cord you are using.

Connect the USB cord

as shown in figure 5 (PC-socket). Plug the USB connector (type A) into the corresponding

socketof yourPC andthe USBconnector (type B) into the USB socket on the back ofthe telephone

. The telephone

is automatically detected by the PC, provided that both devices (telephone and PC) are switched on.

Information:

Installat ion of a device driver is started automatically the first time you connect the telephone to the PC. Insert the

WIN-Tools CD-ROM supplied with the telephone and follow the instructions displayed on the screen.

You will need a hub (USB distributor) if you plan to use several USB terminal devices at your PC. Connect the hub to

the USB port of the PC. You can then connect other USB terminal devices, including the telephone to the hub.

CS 410, CS 410-U connecting the audio cable (Audio in / Audio Out)

The telephone is equipped with an input

and an output

for audio signals. Both these ports have a 3. 5 mm

stereo socket. When using the optional answering machine module, you can connect the telephone via these ports to

the PC sound card in order to upload announcements into the phone or save recorded messages on the PC.

Connecting the telephone to a PC Description and installation

Figure: 4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Funkwerk CS410 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info