68173
14
Zoom out
Zoom in
Vorherige Seite
1/103
Nächste Seite
·
Swtich to Use DHCP.
Select »on«. Use automatic IP
adress setting
off
on®
·
The telephone and PABX system are synchronized.
Information:
If there is no connection to the PABX system (no LAN link, or the telephone has not been logged in), the symbol l
»©-----/ /----‰ « will be shown in the display instead of the time.
You can now use the IP system telephone at the ISDN or UP0 port.
You find a complete description of the configuration on page 68.
Changing the label
Thelabel panels for the functionkeys are included on aseparate sheet enclosedin theoperating instructions. Cut out
the label you wish to use.
To change the label panel, press the flexible cover together between your index finger and thumb and lift it out. The
label panel can now be changed.
You can fill in the label for your telephone with your own information and then print it out using the Professional
Configurator. Also available on the WIN-Tools CD-ROM is an Adobe Acrobat file containing templates that you can
also fill in and print out.
Pictographs
The pictographs (symbols) described below have been used in these operating instructions to illustrate some
procedures for setting and using the telephone.
b Liftupthehandsetorstartprepared dialing.
a Replacehandset.Thetelephoneisidle.
l Acallissignaled.Theringermelody sounds.
g Youareconductingacall.
d Athree-partyconferencecallisinitiated.
q Youhearthepositiveornegativeacknowledgementsignal.
t Selectthecallnumber,code,characterortext.
X Thissymbolpromptsyoutoselectacertaindigitorcharacter.
09
*#
Presstheappropriatebuttononthepush-buttonset.
# WhenyouenterthenumberfordialingviaanSIPprovider,dialingisnotperformeduntilaround5seconds
afterthelastdigithasbeenentered. Dialing isperformedimmediatelywhenyoupressthe#keyafterente
-
ringthenumber.Inthiscase,theterminaldevicemustalsobecapableofdialingintothephonesystemwith
the#.
Description and installation Changing the label
10
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Funkwerk CS410 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info