Bedienungsanleitung Funkwerk CS410 (Seite 26 von 103) (Englisch)

68173

Zoom out

Zoom in

Vorherige Seite

1/103

Nächste Seite

number or name of the desired party. As soon as you accept this information (by picking up the handset, for

example), the selected party is called automatically.

Automatical recall to busy subscriber (CCBS)

Youhear the busy signalwhen callingthe extensionof the person you are trying to reach. »Completion of call tobusy

subscriber« allows you to call the extension as soon as the other subscriber hangs up his or her telephone.

Automatic completion of calls on no reply (CCNR)

When you call the desired number you always get a ringing signal, but the party is not near the phone or does not

answer. Usingthefunction»Completion of callonnoreply«youcanreachthepartyimmediatelywhenhe/sheendsa

call, or lifts and then replaces his/her handset.

Programming completion of call to busy subscriber

btg

Dial number Subscriber busy or does

not answer

Clbckbusy

The»Clbckbusy«softkeyisonly displayed, when automatic completion of calls are possiblewith theexchangeoffice

or with the pabx. The features »Recall to busy subscriber« or »Recall on no answer« must be applied for at your

service provider for external call-backs.

You can configure three call-backs at a time. If you are using an LCR procedure (e. g. the LCR procedure of the

phone), the »Completion of call to busy subscriber« function is carried out automatically via your standard network

service provider.

Information:

If automatic redialing is active, the »Clbckbusy« softkey is shown on the display. Press the right arrow button or

the »Continue« softkey, to return to the normal idle state display.

Viewing and clearing call-back calls

When the phone is in idle, any call-back calls that are initiated can be viewed in the display by pressing the softkey

»Clbckbusy«. Press this softkey to view the call-back calls. You can then view the individual completion calls using

the arrow keys. If you wish to delete a call completion, select this call using the arrow key and then press the menu

key, followed by the »delete?« softkey.

All completions of call are automatically deleted after a predefined period. This time is setby the service provider for

external call-backs and by the PABX system for internal call-backs.

Information:

If the ISDN telephone is disconnected from the ISDN network, (for example by unplugging the ISDN connector of

the phone or by switching off or resetting the pabx), all requested call completions will be lost.

Parking a call (not with IP-S400)

The parking function allows you to interrupt a call for up to three minutes. You can then unplug the plug-in

connector for your ISDN system telephone from the ISDN jack and plug it in in a different room. You can continue

with the previous call after »unparking« it. Or you can »unpark« the call at a different phone and continue your call

there.

Parkingis only possible when only one connection is currentlyactive with your telephone. Afteryouunpark the call,

the number for the parked subscriber will no longer be shown.

A »parking code« (0. . . . 99) is used to ensure that you are returned to the proper call when two calls are parked. The

default parking code is 55.

Information:

If you park two calls on anISDN bus this bus is then disabled for further calls. Unparking is possible only on the bus

on which the call was also parked. Parking is only possible when only one connection is currently active with your

telephone.

Making Calls Parking a call (not with IP-S400)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Funkwerk CS410 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info