Bedienungsanleitung Funkwerk CS410 (Seite 43 von 103) (Englisch)

68173

Zoom out

Zoom in

Vorherige Seite

1/103

Nächste Seite

Setting the tariff factor and the currency

Begin as follows:

Msss

Configuration Charge

»Charge« Enterthe new charge factor and confirm your entry by clicking »OK«. The chargefactor length is re

strictedto4characters. Toenteracomma,usetheasteriskkey.

»Currency« Enterthe new currencyand confirm your entry by pressing OK. The currencyname is restricted to 6

characters. The assignments for the keypad for entering letters, digits and special charactersare de

scribedonpage12.

»delete?« All charge data stored in the telephone are deleted. Recognition and saving of the procedure that is

usedfortransferofcostinformation(seepage40)isthenre-activated.

Programming a charge limit for an extension number

You can set up a charge account for each number (MSN) that has been entered in the telephone. An amount in the

configured currency that is available for making calls will then be allocated to this account for the defined number

(MSN). Once this amount has been exhausted, only free-of-charge calls can be directed for this MSN extension

number. When you have programmed specific dial ranges for this telephone, calls with costs can be directed to the

unrestricted numbers.

If this limit is reached during an ongoing call, the call can be completed.

When the amount for the account is increased, or when the accrued charges are cleared calls with costs can again be

made.

Information:

Attention: Not all service providers transfer charge rate information. If you make calls using a service provider

which does not transmit charge information, the charge account is ineffectual.

Configuration of a charge account for a phone number (MSN) is described below using MSN1 as the example

Begin as follows:

Msss>s

Configura

tion

MSN MSN-1 ...

MSN-10

Charge

Enter the amount that is available for this number for making

calls.

Confirm your entry with OK.

Dial inhib. by charge

Limit/EUR>10`

¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬

If you enter the amount available for making calls as »0«, the charge account is not activated.

Enabling or inhibiting an extension number (MSN) for outgoing calls

Each number stored in the phone (»MSN-1«…»MSN-10«) can be enabled or inhibited separately for outbound calls.

If you have inhibited an MSN for outgoing calls, no outgoing calls can be initiated through this number (e. g. MSN

assignment via function key). Incoming calls can continue to be received by this number.

If you attempt to set up a call using a number that has been inhibited for dialing, the following message is shown in

the display »Inhibit. : msn«.

Enabling or inhibiting of a number for outgoing calls is protected by an MSN-specific PIN. You must enter this PIN

in advance during configuration of the number (MSN). After that, you can inhibit or enable dialing of external

numbers (outgoing calls) for this MSN.

Setting the tariff factor and the currency Monitoring costs

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Funkwerk CS410 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info