Bedienungsanleitung Furuno RO4700 (Seite 19 von 22) (Englisch)

612625

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Page 37 Page 38

6.8 DSC SETUP

The submenu is used to set behavior of the DSC/ATIS function.

The following 5 items are available for selection.

USER MMSI

GROUP MMSI

INDIV REPLY

DSC ENABLED

POS REPLY

6.8.1 ENTER YOUR USER MMSI

This is a once-only operation.

You must enter your user MMSI first then you can access the DSC

functions.

1 Select DSC SETUP then USER MMSI and press the CH knob. If an

existing MMSI is stored, the values appear.

2 If the MMSI is blank, a dashes line appear. Enter user MMSI along

the dashed line. Press the CH knob to confirm each correct entry to

move to the next digit.

If your make an error, Rotate the CH knob < appears, then press

the CH knob to backup and correct the entry.

3 Hold the CH knob to store your user MMSI.

4 Enter your user MMSI again as a password check, hold the CH knob to

permanently store the your user MMSI and return to the menu.

5 You can view your stored user MMSI at anytime by selecting user MMSI

in the main menu.

6 If there is no USER MMSI stored and the radio’s DSC function is

attempted, the radio says “DSC IS NOT OPERATIONAL.” & “PLEASE

ENTER MMSI” as below.

DSC WARNING MESSAGE

6.8.2 MAINTAIN GROUPS

You can program up to three group MMSI numbers and associated Group

names, group MMSI numbers always begin with a zero (0). You only enter the

last 8digits of the group ID number, the intial”0” is automatically entered.

6.8.2.1 ENTER YOUR GROUPS

1 Select GROUP MMSI and press the CH knob. If an existing names &

MMSI data are stored, the values appear.

If is blank, the dash appear on LCD

2 The entry procedures are same as that of the BUDDY LIST.

6.8.2.2 EDIT USER GROUPS

1 Select DSC SETUP then GROUP MMSI and press the CH knob. The

existing names & MMSI data are displayed on screen. Select the Buddy

name or, only the MMSI that you wanted

2 Press the CH knob to edit. The entry procedures are same as that of the

BUDDY LIST

3 when the edition is finish press the CH knob to store the changes and

return to the GROUP MMSI screen.

6.8.2.3 DELETE A GROUP

1 Select GROUP MMSI and press the CH knob. The existing group

names are displayed on screen

2 Select that you wanted delete and press the CH knob will display

EDIT or DELETE item

3 Select DELETE and press the CH knob will display DELETE

GROUP menu arrow point the YES, then press the CH knob to

DSC IS NOT

OPERATIONAL

PLEASE ENTER

MMSI

USER GROUP

>EILEEN

CHANG

FRIENDS

EDIT NAME:

>EILEEN

MMSI:

ID053421608

EILEEN

>EDIT

DELETE

DSC SETUP

USER MMSI

>GROUP MMSI

INDIV REPLY

USER GROUP

> - - - - - - - -

- - - - - - - - -

- - - - - - - -

GROUP NAME

> - - - - - - - - - -

GROUP MMSI

IDO - - - - - - - - -

INPIT MMSI

NUMBER

>- - - - - - - -

HOLD ENTER

USER MMSI

INPUT AGAIN

>- - - - - - - -

HOLD ENTER

USER MMSI

ID 500000001

>SAVE

ANCEL

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Furuno RO4700 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info