522156
16
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
1. MOUNTING
8
3. Slip the rubber bushing (supplied) onto the sensor cable at the location shown below. Attach
the cable to the connector. Make a loop in the cable to prevent cable fatigue.
4. Tighten the cable clamp and close the cable cover.
5. Orient the sensor so the bow mark (on the underside of the narrower end) on its underside is
facing the bow. Fasten the sensor to the platform with hex. bolts, spring washers and flat
washers. Use M10x25 bolts if the thickness of the platform is less than 5 mm. For greater
thickness use M10x30 bolts. The torque for the hex. bolts should be 20±2Nm.
Note: For the sensor cable passed through the mounting pipe, fill the gap between the pipe
and the cable with silicone sealant, for waterproofing.
6. Coat exposed parts of bolts and wash-
ers with silicone sealant.
7. If you have the optional "bird-repellent
fixtures", attach them to the sensor sim-
ilar to as shown in the figure below. (You
may change the pattern as desired.)
8. Fix the sensor cable to the pipe at suit-
able intervals with the cable ties (sup-
plied).
Cable clamp
Loop in cable
Rubber bushing
Projection
(This end of bushing
next to connector.)
Rubber bushing
Sensor
Coat with
silicone sealant.
Platform
Busse-Yachtshop.de info@busse-yachtshop.de
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Furuno SC-30 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info