Bedienungsanleitung Furuno WMB-3250 Wassp (Seite 5 von 62) (Englisch)

648605

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Doc. P/N: WSP-009-004

Version: V1.3

Issue Date: August 2013

www.wassp.com

Page 5 of 62

Operator Manual

This operator manual describes how to operate the WASSP System Multibeam Sonar

System program through its graphical user interface. There may be variations due to on-going

developments and enhancements.

1. Purpose of this Manual

2. Introducing the WASSP System Multibeam Sonar System

The WASSP is a multibeam Sonar system that uses a wide-angle sonar transducer to prole the

water column and seaoor to a high resolution. It is this unique combination of multibeam sonar

and computer processing power which provides you with unparalleled information about the

underwater environment. It gives you a wide 120° port-starboard swath of the water column and

seaoor, allowing you to nd and position reefs, wrecks, and objects in the water column or on

the seaoor. From the 120° swath, the system processes 224 dynamic beams, with each beam

containing detections from the water column and seaoor.

The information is presented in a user-friendly, mouse controlled, Windows-based operating

system. The system can output data to plotting software packages. For optimal performance,

roll, heave, pitch, heading and position inputs are all required.

Mapping an area of the seaoor requires motion compensation to compensate for the motion of

the vessel. The efciency of motion compensation strongly depends on the quality of the motion

data. Accurate ship measurements must be taken and the dockside and sea trial commissioning

procedures carried out thoroughly during installation. Even with good sensors, mapping

performance in rough seas will be less accurate than in calm water.

The WASSP System can be applied to a variety of survey methods, as well as search and

rescue, customs, and police applications.

2.1 Main Features

The WASSP System has the following main features:

► Simple to use

► Improved performance

The use of separate transmit and receive arrays has enabled WASSP Ltd. to optimise both

transmit performance and receive sensitivity, giving improved performance over traditional

sonar and sounders.

► High detail picture of the marine environment

The transmit beam spreads over a 120° port-starboard swath and covers 4° fore-aft while

the receive beam covers 10° fore-aft, displaying a highly detailed picture of the marine

environment.

► Beam stabilisation

Beam stabilisation compensates for the movement of the vessel, providing accurate seaoor

proles.

► Variable beam width

Unique to the WASSP, the single beam view can not only be stabilised, but the beam width

can be varied from 5° to 40°.

► Bottom lock

Bottom lock provides a traditional bottom lock mode where the changes in bottom depth are

ignored and the bottom is drawn at. Echoes are shown relative to the at bottom image,

enabling better discrimination on the seaoor.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Furuno WMB-3250 Wassp Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info