Bedienungsanleitung Fusion Apollo MS-WB670 (Seite 13 von 20) (Englisch)

740410

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Selecting a DAB Station from a List

Select the DAB source.

If necessary, select to scan for local DAB stations.

Select > BROWSE > STATIONS.

Select a station from the list.

Selecting a DAB Station from a Category

Select the DAB source.

If necessary, select to scan for local DAB stations.

Select > BROWSE > CATEGORIES.

Select a category from the list.

Select a station from the list.

Presets

You can save your favorite AM stations and FM stations as

presets for easy access.

You can save your favorite SiriusXM channels if the stereo is

connected to an optional SiriusXM tuner and antenna.

You can save your favorite DAB stations if the stereo is

connected to an optional DAB module and antenna.

Saving a Station as a Preset

With an applicable source selected, tune the stereo to a

station or a channel.

Press and hold .

Selecting a Preset from a List

With an applicable source selected, press and hold the dial.

Select a preset.

Removing Presets

With an applicable source selected, press and hold the dial.

Select .

Select each preset you want to remove.

When you are finished removing presets, select .

Fusion PartyBus Networking

The Fusion PartyBus networking feature allows you to connect

multiple compatible stereos together on a network, using a

combination of wired or wireless connections.

You can group a compatible stereo, such as the Apollo RA770

stereo, with other compatible stereos connected to the network.

Grouped stereos can share available sources and control media

playback on all of the stereos in the group, which allows for a

synchronized audio experience across the vessel. You can

quickly create, edit, and break up groups as needed from any

compatible stereo or remote control on the network.

You can use compatible stereos and remote controls, whether

they are grouped or not, to adjust the volume of the available

speaker zones for any stereo on the network.

You should refer to the installation instructions provided with

your stereo when constructing the Fusion PartyBus network.

Creating a Group

Before you can create a group, you must connect multiple

compatible stereos to the Fusion PartyBus network. See the

installation instructions provided with your stereo for information

about installing and configuring the network.

Press the dial to open the CONTROL screen.

Turn the dial and select EDIT GROUP under the name of the

stereo you want to be the primary stereo in the group.

Select the stereos you want to add to the group.

Select GROUP.

When the stereo is in a group, you can control the volume of all

zones in a group at once from the CONTROL screen. From the

source screen, you can select the source of any stereo in the

group, except the Apollo SRX400 stereo and any sources that

are not enabled on the Fusion PartyBus network (General

Settings, page 9).

Editing a Group

Press the dial to open the CONTROL screen.

Turn the dial, and select EDIT GROUP.

Select the devices you want to add to or remove from the

group.

Select GROUP or UNGROUP.

Leaving a Group

You can leave the Fusion PartyBus group to play local sources

on the stereo.

Press the dial to open the CONTROL screen.

Turn the dial, and select EDIT GROUP under the name of the

group that you want to leave.

Select the devices you want to remove from the group.

Select UNGROUP.

Network Source Considerations

When selecting sources to play over the network, you should

observe these considerations.

• A zone stereo, such as the Apollo SRX400, can create or join

a group to control and play sources from other stereos, but it

cannot share its sources with the group.

• You cannot share an AirPlay source with grouped stereos.

Using AirPlay 2 software, you can play content on multiple

stereos on the network, but the stereos must not be grouped

(Connecting an Apple Device Using AirPlay, page 5).

• You can disable sharing on most sources by changing the

PARTYBUS ENABLED setting for the source. When

disabled, the source cannot be selected from a grouped

stereo (General Settings, page 9).

• When audio sources are shared over a data network, there is

a slight delay in the synchronized audio that may be

noticeable if you are also using an external audio source.

◦ If you have a television with an Optical Out connection to

the stereo and you continue to use the television

speakers, there will be a delay between the audio from the

television speakers and the optical audio synchronized on

the grouped stereos.

◦ If you synchronize a radio station and tune that same

radio station on a non-networked stereo, there will be a

delay between the audio from the non-networked stereo

and the audio from the radio station synchronized on the

grouped stereos.

◦ You can remove this delay by changing the PARTYBUS

ENABLED setting for the source, but the source cannot be

shared with grouped stereos.

General Settings

NOTE: When the stereo is in a group, not all settings and

options are available.

Select > SETTINGS.

NOTE: When a check box is filled, the option is on. When the

check box is clear, the option is off.

Presets 9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fusion Apollo MS-WB670 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fusion Apollo MS-WB670

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info