Bedienungsanleitung Fusion Apollo RA770 (Seite 7 von 20) (Englisch)

691366

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

On your Apple device, open the music app you want to

stream to the stereo.

From the music app or program, select or , and select

the name of the stereo.

If necessary, start playing music on the app.

The stereo changes to the AirPlay source automatically and

plays audio from your Apple device.

NOTE: On some AirPlay devices, adjusting the volume on

the device affects the volume level on the stereo.

NOTE: You cannot stream the AirPlay source to other

stereos on the network using the FUSION PartyBus feature.

Setting an AirPlay Password

You can set a password that a user must enter when connecting

to the stereo using the AirPlay feature.

Select > > AirPlay PASSWORD.

Enter a password.

NOTE: The AirPlay password is case-sensitive.

When connecting to this stereo using the AirPlay feature, the

user must enter the password on their Apple device.

Connecting a UPnP Device

You must connect your stereo to a network, either wired or

wirelessly, to play media from a UPnP device, such as a NAS

device.

Connect your UPnP device to the same network as the

stereo, referring to the instructions provided with your UPnP

device and router if necessary.

Select the UPnP source on the stereo (Selecting a Source,

page 1).

You can browse and play media from the UPnP device the in

same way that you would from a USB flash drive (Controlling

Music Playback on a Connected Android Device, USB Flash

Drive, or Media Player, page 4).

Audio Control

Adjusting the Volume

Turn the dial to open the volume screen.

Select an option:

• Use the touchscreen to adjust the volume levels for each

zone.

• Use the dial to adjust the volume for the highlighted zone.

If necessary, press the dial to switch between zones.

TIP: To control all zones at the same time, you can press the

dial until GLOBAL is highlighted, or use the touchscreen to

adjust the GLOBAL zone.

Muting all Connected Stereos

You can quickly mute the audio from this stereo or from all

stereos connected to the network (FUSION PartyBus

Networking, page 8).

From any source, select .

The mute symbol appears and audio from this stereo is

silenced.

Select MUTE SYSTEM.

Audio from all connected stereos is silenced.

Select UNMUTE SYSTEM.

Audio is restored to all connected stereos.

Adjusting the Tones

Select > > ZONE.

Select a zone.

Select TONE.

Select an option:

• Use the slider bar to adjust the level of each tone.

• Press the dial to select a tone, and turn the dial to adjust

the level for the tone.

Disabling the Loud Setting for a Zone

The LOUD setting maintains frequency response at low volumes

and increases perceived loudness at high volumes. This setting

is enabled by default in all zones.

Select > > ZONE.

Select a zone.

Select LOUD to clear the check box.

Adjusting the Gain for an Auxiliary Device

You can adjust the gain for a connected auxiliary device to

achieve a volume level similar to that of other media sources.

You can adjust the gain in 1 dB increments. You can also adjust

the gain for digital sources using an optical audio connection.

Select an auxiliary source.

Select an option:

• To increase the gain, select .

• To decrease the gain, select .

NOTE: To achieve the best audio quality when using a

portable media player with headphone output, it may be

necessary to adjust the volume control on the media player,

instead of adjusting the gain.

Speaker Zones

You can group speakers in one area into a speaker zone. This

enables you to control the audio level of the zones individually.

For example, you could make the audio quieter in the cabin and

louder on deck.

You can set the balance, volume limit, tone, subwoofer level,

subwoofer frequency, and name for each zone, and configure

other zone-specific settings (Speaker Zone Settings, page 9).

Adjusting the Audio Settings for a Zone

Select > > ZONE.

Select a zone.

Select MORE.

Select one or more options:

NOTE: Not all options are available for all zones.

• To limit the maximum volume output of this zone, select

VOLUME LIMIT, and adjust the level.

• To set the subwoofer level for this zone, select SUB

LEVEL, and adjust the level.

• To adjust the right and left speaker balance of this zone,

select BALANCE, and adjust the balance.

Adjusting the Subwoofer Filter

You can use the subwoofer filter setting to control the subwoofer

cutoff frequency for each zone, which can enhance the blend of

the sound produced by the speakers and the subwoofer. Audio

signals above the selected frequency are not passed to the

subwoofer.

NOTE: If a DSP setting has been applied to zone, this setting

cannot be changed on the stereo. You can view the DSP setting

for the optimal cutoff frequency as calculated by the DSP

controller, but cannot adjust it.

Select > > ZONE.

Select a zone.

Select SUB FREQ.

Audio Control 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fusion Apollo RA770 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fusion Apollo RA770

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info