Bedienungsanleitung Fusion MS-AV700i (Seite 58 von 68) (Englisch)

564424

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

My iPod/iPhone will not

connect to the Head unit

while in the dock.

IfyourHeadunitdisplays“NotConnected”whileusingiPodas

input source:

• Checkthatyouareusingthecorrectsleevecombination.If

you have the incorrect sleeve combination this could prevent

the iPod connector from mating correctly. It could also dam-

age the connector in the dock or your iPod/iPhone itself.

If you are uncertain which iPod model you have, go to

http://www.apple.com/support/ to get the correct model

information for your iPod and sleeve.

If you are still unable to connect once you know for certain

you have the correct iPod/iPhone–sleeve combination:

• Ensurethatyouhavethelatestversionofoperatingsoft-

ware installed in your iPod/iPhone and the latest iTunes

version. To do this, connect your iPod/iPhone to iTunes and

it will check and, if necessary, prompt you to download the

latest version.

If you are still unable to connect once you have conﬁrmed

that you have the latest software or you have updated your

iPod/iPhone:

• ResettheiPod/iPhone(seetheusermanualforyourApple

product)andalsoresettheHeadunit(seeFUSIONuser

manual).

If you are still unable to connect:

• ContactyourFUSIONdealerorcontactFUSIONviathe

tech email on the FUSION website.

Problem Solution

iPod

Why does my FUSION

Head unit keep locking

up when connected to my

iPod/iPhone?

If you are experiencing software lock-ups or your unit freezes:

• ResettheHeadunitbypressingtheresetbuttoninside

the face plate.

• ResetyouriPod/iPhone(seeApplewebsitefrommodel-

specicinformation).Thisshouldresumenormaloperation.

• MakesureyouhavethelatestversionofiTunesandthelat-

est operating software in your iPod/iPhone. It is important

to update software when Apple releases new versions. If you

are connected via a dock, ensure you are using the correct

sleeveandtheconnectiontotheHeadunitissecure.

Will my iPod/iPhone

connect to my FUSION

product if the battery is

flat?

No. It will take a number of minutes for the Apple product to get a

minimum level of charge before it can connect and become opera-

tional. Please connect and wait for the unit to initialise.

My Apple Device has gone

into thermal protection

Caution: The internal dock temperature of the MS-IP700i will be

slightly higher than the ambient temperature outside the head

unit. Should your Apple iPhone or iTouch shut down due to exceed-

ing the operating temperature please carefully remove it from the

MS-IP700i and allow it to cool down before using again. Using your

Apple device in a low charged state will increase the heat generated

whilst it is charging. For more information relating to this please

follow the Apple support web site link below.

http://support.apple.com/kb/ht2101

Why does my MS-IP700i

Stereo not connect to my

second iPod?

TheMS-IP700iStereo(withinternaldock)doesNOTsupport

multiple iPods connected simultaneously. Correct operation is only

guaranteed with a single device connected.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fusion MS-AV700i Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fusion MS-AV700i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info