Bedienungsanleitung Fusion MS-AV755 (Seite 7 von 16) (Englisch)

691949

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

• To decrease the gain, select .

Auxiliary Device Recommended Gain

Setting(dB)

Portable media player with headphone

output

from -9 dB to -6 dB

CD/DVD player with line output -6 dB

Portable media player with line output 0 dB

Game console with line output 0 dB

Older audio/visual equipment with line

output (for example, VHS or cassette

deck)

from 6 dB to 9 dB

NOTE: To achieve the best audio quality when using a

portable media player with headphone output, it may be

necessary to adjust the volume control on the media player,

instead of adjusting the gain.

Selecting a Source

Select .

Select an option:

• Turn the dial to highlight a source.

• Select repeatedly to highlight a source.

Press the dial to select the source.

Adjusting the Volume

Use the dial to adjust the volume.

If necessary, press the dial to switch between zones.

TIP: To control all zones at the same time, press the dial until

all zones are highlighted.

Adjusting the Tones

Select > Settings > Tone.

Use the dial to adjust the level.

Press the dial to switch to a different tone.

Speaker Zones

You can group speakers in one area into speaker zones. This

enables you to control the audio level of the zones individually.

For example, you could make the audio quieter in the cabin and

louder on deck.

Up to two pairs of speakers can be connected per zone, in

parallel, to increase the amplifier output.

Zones 1 and 2 are powered by the on-board amplifier. To use

the RCA line outputs and the RCA subwoofer outputs, you must

connect external amplifiers.

You can set the balance, volume limit, subwoofer level, and

name for each zone.

Setting up Speaker Zones

Select > Settings > Zone.

Select a zone.

Select one or more options:

NOTE: Not all options are available for all zones.

• To disable the zone and remove it from the audio level

pages, select Enabled to clear the check box. When a

zone is disabled, you cannot change any of the settings

for that zone.

• To link zones 1 and 2, select Link to Zone 1 to fill the

check box.

• To adjust the right and left speaker balance of this zone,

select Balance, and use the dial to set the balance.

• To limit the maximum volume output of this zone, select

Volume Limit, and use the dial to set the limit.

• To set the subwoofer level for this zone, select Sub Level,

and use the dial to set the level.

TIP: To open the subwoofer level from any screen, press

and hold the dial for three seconds.

• To give the zone a specific name, select Name (Entering

Text, page 1).

• To allow the volume of this zone to be controlled by

another amplifier or stereo and provide a fixed line level

output, select Volume Control to clear the check box

(zones 3 and 4 only).

Linking Zones

Linking zones allows you to keep the volume levels of two zones

synchronized. Adjusting the volume of either of the linked zones

affects both zones.

Select > Settings > Zone > Zone 2.

Select Link to Zone 1.

When zones 1 and 2 are linked, appears between zones 1

and 2 on the volume screen.

NOTE: After zones 1 and 2 are linked, you cannot adjust the

volume of each zone individually.

Disabling the Internal Amplifiers

If you do not connect speakers directly to zones 1 and 2, you

can disable the internal amplifiers to reduce power consumption.

Select > Settings > Zone.

Select Amps On to clear the check box.

Adjusting the Subwoofer Limit

You can use adjust the subwoofer level for each zone.

Select > Settings > Zone.

Select a zone.

Select Sub Level.

Use the dial to adjust the subwoofer level.

Press the dial to save the selection.

Adjusting the Subwoofer Filter

You can use the subwoofer filter setting to control the subwoofer

cutoff frequency, which can enhance the blend of the sound

produced by the speakers and the subwoofer. Audio signals

above the selected frequency are not passed to the subwoofer.

The setting applies to all subwoofer outputs.

Select > Settings > Subwoofer Filter.

Select a frequency.

Press the dial to save the selection.

Infrared Remote Control

You can use the infrared (IR) remote control to control the AV

stereo. The remote buttons function similarly to the device

buttons. The result of a button press varies based on the active

media source.

NOTE: The remote is included only with AV models.

Button Function

Turns the device on and off.

Cycles the available sources.

DSP Displays the CD track, DVD chapter, and title you are

watching or listening to on the connected TV.

ZOOM Zooms in on the DVD picture.

SUB-T Cycles through the available subtitle languages for the

DVD.

DVD Opens the DVD setup menu on the connected TV.

MNU • Opens the navigation menu.

• DVD source: Opens the menu in the connected TV.

Mutes and unmutes the audio.

Arrows Moves through the menus and settings.

Getting Started 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fusion MS-AV755 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fusion MS-AV755

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info