Bedienungsanleitung Fusion MS-RA55 (Seite 4 von 6) (Englisch)

691947

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

If your compatible Bluetooth device does not immediately

connect to the stereo, repeat steps 1 through 7.

Bluetooth Range Information

The stereo and Bluetooth wireless devices have a range of 10 m

(33 ft.). For optimal performance, the Bluetooth wireless device

should also have a clear line of sight to the stereo.

Bluetooth Source Settings

With the BLUETOOTH source selected, select .

DISCOVERABLE: Allows the stereo to be visible to Bluetooth

devices. This setting turns off automatically after two minutes

to prevent possible interruption to audio after pairing a

Bluetooth device to the stereo.

Radio

To listen to AM or FM radio, you must have a suitable marine

AM/FM antenna properly connected to the stereo and be within

range of a broadcasting station. For instructions on connecting

an AM/FM antenna, see the stereo installation instructions.

Setting the Tuner Region

You must select the region you are in to receive AM and FM

stations properly.

Select > SETTINGS > TUNER REGION.

Select the region you are in.

Changing the Radio Station

Select an applicable source, such as FM.

Select repeatedly to move through the tuning modes:

• Select AUTO to scan and stop on the next available

station.

• Select MANUAL to select a station manually.

• Select PRESETS to select a saved station preset.

Select or to tune to the station.

Presets

You can save your favorite AM stations and FM stations as

presets for easy access.

Saving a Station as a Preset

With an applicable source selected, tune the stereo to a

station.

Select > PRESETS.

Select SAVE CURRENT.

TIP: You can quickly save the selected station as a preset by

holding .

Selecting a Preset from a List

Before you can select a preset from a list, you must save at

least one station as a preset.

Select the applicable source.

Select > PRESETS.

Select a preset from the list.

Removing Presets

With an applicable source selected, select > PRESETS >

REMOVE PRESET.

Select an option:

• To remove one preset, select the preset.

• To remote all presets, select REMOVE ALL PRESETS.

General Settings

Select > SETTINGS.

NOTE: When an option button is filled, the option is on. When

the option button is clear, the option is off.

ZONE: Enables you to set the balance, volume limit, and names

of the speaker zones.

ZONE > TONE: Adjusts the bass and treble tones.

LCD: Adjusts the backlight brightness and contrast settings

(Adjusting the Backlight Brightness and Contrast, page 1).

LANGUAGE: Sets the language on the device.

POWER SAVE: Disables the LCD backlight after one minute of

inactivity to save battery power.

TUNER REGION: Sets the region used by FM and AM.

SET DEVICE NAME: Sets the name for this stereo (Entering

Text, page 1).

ABOUT: Shows the software version for the stereo.

Appendix

Registering Your FUSION

MS-RA55

Help us better support you by completing our online registration

today.

• Go to www.fusionentertainment.com.

• Keep the original sales receipt, or a photocopy, in a safe

place.

Cleaning the Device

Dampen a soft, clean, lint-free cloth with fresh water.

Gently wipe the device.

Troubleshooting

The stereo does not respond to key presses

• Turn off power to the stereo for two minutes to reset the

stereo.

My Bluetooth audio is interrupted by short breaks

• Ensure the media player is not covered or obstructed.

Bluetooth technology performs best with line-of-sight

operation.

• Bring the media player within 10 m (33 ft.) of the stereo.

• Turn off the DISCOVERABLE setting after pairing a

Bluetooth device to the stereo.

The stereo does not display all song information from

my Bluetooth source

The availability of song information, such as song title, artist

name, and track duration, depends on the capability of the

media player and music application.

Album cover artwork and shuffle and repeat status icons are not

supported by this stereo on Bluetooth technology.

Reducing Unexpected Noise

If the stereo is subject to strong electrical interference, this

interference might be heard through the speakers. You should

take appropriate action to suppress or reduce the noise.

• Add clip-on ferrite beads to the cables connected directly to

the product.

• Add clip-on ferrite beads to the device in the vessel that is

causing the interference.

• Disconnect the AUX input cable from the RCA connector

when it is not used.

2 Radio

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fusion MS-RA55 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fusion MS-RA55

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info