Bedienungsanleitung Fusion MS-RA70N (Seite 6 von 12) (Englisch)

691370

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

The stereo is compatible with Android

™

devices that support the

Android Open Accessory (AOA) protocol.

NOTE: The stereo is not compatible with Android devices in

MTP or PTP mode. See the instructions for your Android device

to connect using AOA, if necessary.

The stereo is compatible with media players and other USB

mass storage devices, including USB flash drives. Music on

USB drives must meet these conditions:

• The USB mass storage device must be formatted using the

FAT32 file system.

• The music files must be formatted as MP3 files.

• Each folder on the storage device can contain a maximum of

250 MP3 files.

Connecting a USB Device

You can connect a USB device to the USB port on the stereo.

Locate the USB port on the back of the stereo.

Connect the USB device to the USB port.

Select the USB source.

Connecting an Auxiliary Device

You can connect various auxiliary devices to the stereo. These

devices have either RCA connectors, a line output, or a

headphone output jack.

Locate the auxiliary connectors on the wiring harness.

If necessary, connect an RCA-to-3.5 mm adapter cable to the

auxiliary device.

Connect the auxiliary device to the RCA connectors on the

wiring harness.

Adjusting the Gain for the Auxiliary Device

You can adjust the gain for the connected auxiliary device to

achieve a volume level similar to that of other media sources.

You can adjust the gain in 1 dB increments.

Select an auxiliary source.

Select an option:

• To increase the gain, select .

• To decrease the gain, select .

Auxiliary Device Recommended Gain

Setting(dB)

Portable media player with headphone

output

from -9 dB to -6 dB

CD/DVD player with line output -6 dB

Portable media player with line output 0 dB

Game console with line output 0 dB

Older audio/visual equipment with line

output (for example, VHS or cassette

deck)

from 6 dB to 9 dB

NOTE: To achieve the best audio quality when using a

portable media player with headphone output, it may be

necessary to adjust the volume control on the media player,

instead of adjusting the gain.

Connecting the Stereo to a Garmin

Watch

For a list of a compatible Garmin watches, go to

www.fusionentertainment.com/marine.

For more information about the watch, see the watch manual at

www.garmin.com/manuals.

Following the instructions in the watch manual, install the

FUSION-Link

™

app from the Connect IQ

™

store onto the

watch.

On the stereo, select the BT source.

Select > DISCOVERABLE.

The stereo remains discoverable for two minutes.

Bring the watch within 3 m (10 ft.) of the stereo.

NOTE: Stay 10 m (33 ft.) away from other ANT

devices

while pairing.

Open the FUSION-Link app on the watch.

The first time you open the app on the watch, the watch

automatically pairs with and connects to the stereo. If you

need to pair to another stereo, in the FUSION-Link app,

select Settings > Pair new.

Control the audio playback using the FUSION-Link app on

the watch.

After the devices are paired, they connect automatically when

they are turned on, within range, and the app is open on the

watch.

Adjusting the Volume

Use the dial to adjust the volume.

If necessary, press the dial to switch between zones.

TIP: To control all zones at the same time, press the dial until

all zones are highlighted.

Adjusting the Tones

Select > SETTINGS > TONE.

Use the dial to adjust the level.

Press the dial to switch to a different tone.

Speaker Zones

You can group speakers in one area into speaker zones. This

enables you to control the audio level of the zones individually.

For example, you could make the audio quieter in the cabin and

louder on deck.

Zones 1 and 2 are powered by the on-board, Class AB amplifier.

To use the two line outputs and the two subwoofer outputs, you

must connect external amplifiers.

You can set the balance, volume limit, and name for each zone.

You can set the subwoofer level for zone 1.

Setting up Speaker Zones

Select > SETTINGS > ZONE.

Select a zone.

Select one or more options:

NOTE: Not all options are available for all zones.

• To link zones 1 and 2, select LINK TO ZONE 1 to fill the

option button (zone 2 only).

• To adjust the right and left speaker balance of this zone,

select BALANCE, and use the dial to set the balance.

• To limit the maximum volume output of this zone, select

VOLUME LIMIT, and use the dial to set the limit.

• To set the subwoofer filter, select SUB FILTER, and use

the dial to set the filter (zone 1 only).

• To set the subwoofer level, select SUB LEVEL, and use

the dial to set the level (zone 1 only).

TIP: To open the subwoofer level from any screen, press

and hold the dial for three seconds.

• To give the zone a specific name, select SET ZONE

NAME (Entering Text, page 1).

Linking Zones

Select > SETTINGS > ZONE > ZONE 2.

Select LINK TO ZONE 1 to fill the button.

When zones 1 and 2 are linked, appears between zones 1

and 2 on the volume screen.

Adjusting the Subwoofer Filter

You can use the subwoofer filter setting to control the subwoofer

cutoff frequency, which can enhance the blend of the sound

produced by the speakers and the subwoofer. Audio signals

2 Getting Started

Fusion MS-RA70N Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fusion MS-RA70N

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info