29029
38
Zoom out
Zoom in
Vorherige Seite
1/127
Nächste Seite
38
<Model Basic Setting Procedure>
4. Throttle cut setting
Throttle cut can be performed with one touch by a
switch without changing the throttle trim position.
Set throttle cut with the Throttle Cut function of
the Linkage Menu. After activating the throttle cut
function and selecting the switch, adjust the throttle
position so that the carburetor becomes fully closed.
For safety, the throttle cut function operates the
throttle stick in the 1/3 or less (slow side) position.
5. Idle down setting
The idling speed can be lowered with one touch by
a switch without changing the throttle trim position.
Perform this setting with the Idle Down function of the
Linkage Menu. After activating the Idle Down function
and selecting the switch, adjust the idle down speed.
For safety, the idle down function acts only when the
throttle stick is slow side.
*While the Throttle Cut function is in operation, the Idle
Down function does not work.
6. AFR (D/R)
AFR function is used to adjust the throw and
operation curve of the stick, lever, and switch functions
&+WR&+DQG9WR9IRUHDFKÀLJKWFRQGLWLRQ
This is normally used after End Point (ATV) has
GH¿QHGWKHPD[LPXPWKURZGLUHFWLRQV
7. Airbrake
This function is used when an air brake is necessary
when taking off or diving, etc.
The preset elevators and flaps (camber flap, brake
ÀDSRIIVHWDPRXQWFDQEHDFWLYDWHGE\DVZLWFK
7KHRIIVHWDPRXQWRIWKHDLOHURQHOHYDWRUDQGÀDS
ﶬﷄﶰﶶﶬﶬﶼ﷊﷎ﶪﶬ
ﴶﴸﴸﳜ
﷒﷎ﶬﵼﷂﶸﷄ
B8D
dXﻪ
﷎ﶪﶬﶴﶶﶮ
8*<<
ﶮﶦﷂﶬ﷎ﷄ
ﹼ﹘﹚
﹢﹤﹜ﹰ﹚ﹰ﹤﹦
﷤﷦﷦ﶊ
﷦ﶊ
ﶮ﷊ﶬﶬﷂﶸﷆ
ﶰ﷒ﶸﷆ﷊
﷜﷦ﶊ
ﷄﷂﷆﷄ
ﶼﶶﶦ
ﶺﶶ﷌﷊ﶼ﷤
﷎ﶶﶸ﷌ﷂﶬ﷤
ﴶﴸﳰﴶﴸﳰﴸﴸ
ﶬﷄﶰﶶﶬﶬﶼ﷊﷎ﶪﶬ
ﴶﴸﴸﳜ
﷒﷎ﶬﵼﷂﶸﷄ
B8D
dXﻪ
﷎ﶪﶬﶴﶶﶮ
8*<<
ﶮﶦﷂﶬ﷎ﷄ
ﹼ﹘﹚
﹢﹤﹜ﹰ﹚ﹰ﹤﹦
﷤﷦﷦ﶊ
﷦ﶊ
ﶮ﷊ﶬﶬﷂﶸﷆ
ﶰ﷒ﶸﷆ﷊
﷜﷦ﶊ
ﷄﷂﷆﷄ
ﶼﶶﶦ
ﶺﶶ﷌﷊ﶼ﷤
﷎ﶶﶸ﷌ﷂﶬ﷤
ﴶﴸﳰﴶﴸﳰﴸﴸ
ﷂ﷌ﶼ﷊﷌ﶶﶦﶸ
ﴶﴸﴸﳜ
﷒﷎ﶬﵼﷂﶸﷄ
B8D
ﻚﻚfﻪ
ﶶ﷈﷈ﶮ﷊ﶬ
8*<<
ﶮﶦﷂﶬ﷎ﷄ
ﹰﹺ﹪ﹸ
ﹺ﹤﹔﹦
ﷄﷂﷆﷄ
ﶼﶶﶦ
ﶺﶶ﷌﷊ﶼ﷤
﷎ﶶﶸ﷌ﷂﶬ﷤
ﴶﴸﳰﴶﴸﳰﴸﴸ
ﷂ﷌ﶼ﷊﷌ﶶﶦﶸ
ﴶﴸﴸﳜ
﷒﷎ﶬﵼﷂﶸﷄ
B8D
ﻚﻚfﻪ
ﶶ﷈﷈ﶮ﷊ﶬ
8*<<
ﶮﶦﷂﶬ﷎ﷄ
ﹰﹺ﹪ﹸ
ﹺ﹤﹔﹦
ﷄﷂﷆﷄ
ﶼﶶﶦ
ﶺﶶ﷌﷊ﶼ﷤
﷎ﶶﶸ﷌ﷂﶬ﷤
ﴶﴸﳰﴶﴸﳰﴸﴸ
﷒﷈ﶰﶈ﷌ﵼﶰﶆ
ﴶﴸﴸﳜ
ﶺﶶ﷌﷊ﶼ﷤
﷎ﶶﶸ﷌ﷂﶬ﷤
ﴶﴸﳰﴶﴸﳰﴸﴸ
<B8JR0
ﻤdffﻞf
ﴌﴈﴞﴜ
ﴂﴤﳾﴜ ﴂﴤﳾﴜ
ﻤdffﻞf
ﻚﻚﻤfﻞf
ﴈﴚﴚﴀﴜﳾ
ﻚﻚﻤfﻞf
ﴈﴚﴚﴀﴜﳾ
ﳖﴶﴮﴸ
ﳖﴶﴸﴸ
ﳖﴮﴸ
ﳒﴮﴸ
ﳒﴶﴸﴸ
ﳒﴶﴮﴸ
ﴆﴈﴀ
ﳖﴸﳐﴸ
ﳖﴸﳐﴸ
ﴂﴤﳾﴜ
ﴠﴖﴰ
RB<
ﴘﴂﴆﳎﴀﴊﴘ
ﷆﶰﶶﶪﶴ
RH0
﷒﷈ﶰﶈ﷌ﵼﶰﶆ
ﴶﴸﴸﳜ
ﶺﶶ﷌﷊ﶼ﷤
﷎ﶶﶸ﷌ﷂﶬ﷤
ﴶﴸﳰﴶﴸﳰﴸﴸ
<B8JR0
ﻤdffﻞf
ﴌﴈﴞﴜ
ﴂﴤﳾﴜ ﴂﴤﳾﴜ
ﻤdffﻞf
ﻚﻚﻤfﻞf
ﴈﴚﴚﴀﴜﳾ
ﻚﻚﻤfﻞf
ﴈﴚﴚﴀﴜﳾ
ﳖﴶﴮﴸ
ﳖﴶﴸﴸ
ﳖﴮﴸ
ﳒﴮﴸ
ﳒﴶﴸﴸ
ﳒﴶﴮﴸ
ﴆﴈﴀ
ﳖﴸﳐﴸ
ﳖﴸﳐﴸ
ﴂﴤﳾﴜ
ﴠﴖﴰ
RB<
ﴘﴂﴆﳎﴀﴊﴘ
ﷆﶰﶶﶪﶴ
RH0
servos can be adjusted as needed. Also the speed of the
DLOHURQHOHYDWRUDQGÀDSVHUYRVFDQEHDGMXVWHG,1
side/OUT side) A delay can be set for each condition,
and a Cut switch which will turn OFF the delay can be
chosen. Trim amounts can be fine-tuned by setting a
VR. You can also set the Auto Mode, which will link
Airbrake to a stick, switch, or dial. A separate stick
VZLWFKRUGLDOFDQDOVREHVHWDVWKH212))VZLWFK
$GGLWLRQRIÀLJKWFRQGLWLRQV
7KHWUDQVPLWWHUFDQLQVWDOOXSWRHLJKWÀLJKWFRQGLWLRQV
per model. You can assign all switches including sticks,
VZLWFKHVWULPOHYHUVDQGWULPVZLWFKHVDVÀLJKWFRQGLWLRQ
VHOHFWLRQVZLWFKHV<RXFDQDOVRDGGGHOD\HGPL[LQJ
to these functions in order to avoid sudden changes.
0RUHRYHU\RXFDQVHWSULRULW\RUGHUIRUÀLJKWFRQGLWLRQV
when you set more than one condition. In addition, you
can copy conditions and/or change names of conditions.
7KLVFRPPDQGPD\DOVREHXVHGWRGH¿QHZKDWVZLWFKHV
DQGRUFRQWUROVDUHXVHGWRDFWLYDWHHDFKÀLJKWFRQGLWLRQ
The Condition Select function automatically allocates
the Condition 1 for each model type. Condition 1 is
WKHGHIDXOWFRQGLWLRQDOVRUHIHUUHGWRDV1RUPDODQGLV
the only one active when a new model type is defined.
This condition is always on, and remains on until other
conditions are activated by switches.
The Condition Delay can be programmed for each
channel. The Condition Delay is used to change the
servo throw smoothly when switching conditions.
*When a new condition is added, "Condition1" data is
automatically copied.
*Select the condition switch and set the new condition data in
WKHVZLWFK21VWDWH+RZHYHULIWKHJURXSPRGH*5283
was selected in advance, the same data will be input at all the
FRQGLWLRQV6HOHFWWKHVLQJOHPRGH6,1*/(DQGDGMXVWWKH
condition you want to change.
9. When tailless wing model selected
Tailless wing elevator operation uses elevator to camber
PL[LQJ7KLVIXQFWLRQFDQQRWEHSHUIRUPHGDWLQLWLDOVHWWLQJ
﷒ﷂﶰ﷐ﶰ﷒ﶾ﷊
ﴶﴸﴸﳜ
ﻤfﻪ
ﶶ﷈﷈ﶮ﷊ﶬ
ﶬﶪﶸﷂﶸﷆ
ﶺﶶ﷌﷊ﶼ﷤
﷎ﶶﶸ﷌ﷂﶬ﷤
ﴶﴸﳰﴶﴸﳰﴸﴸ
ﻤfﻪ
﷒ﷂﶼ﷠
ﵺﵺﶄ﷦ﶊﶆ
ﻤfﻪ
ﻤfﻪ
﷒ﷂﶼ
ﵺﵺﶄ﷦ﶊﶆ
ﻤfﻪ
ﻤfﻪ
﷒ﷂﶼ﷢
ﵺﵺﶄ﷦ﶊﶆ
ﻤfﻪ
ﻤfﻪ
﷒ﷂﶼ﷞
ﵺﵺﶄ﷦ﶊﶆ
﷒ﷂﶰ﷐ﶰ﷒ﶾ﷊
ﴶﴸﴸﳜ
ﻤfﻪ
ﶶ﷈﷈ﶮ﷊ﶬ
ﶬﶪﶸﷂﶸﷆ
ﶺﶶ﷌﷊ﶼ﷤
﷎ﶶﶸ﷌ﷂﶬ﷤
ﴶﴸﳰﴶﴸﳰﴸﴸ
ﻤfﻪ
﷒ﷂﶼ﷠
ﵺﵺﶄ﷦ﶊﶆ
ﻤfﻪ
ﻤfﻪ
﷒ﷂﶼ
ﵺﵺﶄ﷦ﶊﶆ
ﻤfﻪ
ﻤfﻪ
﷒ﷂﶼ﷢
ﵺﵺﶄ﷦ﶊﶆ
ﻤfﻪ
ﻤfﻪ
﷒ﷂﶼ﷞
ﵺﵺﶄ﷦ﶊﶆ
﷎ﶶﶸ﷌ﷂﶬﶮ﷊ﶼ﷊﷎ﶬ
ﴶﴸﴸﳜ
ﶴﶰﷂﶶﶰﷂﶬﶢ
RLL
0J8R:J
N64"
ﶺﶶ﷌﷊ﶼ﷤
﷎ﶶﶸ﷌ﷂﶬ﷤
ﴶﴸﳰﴶﴸﳰﴸﴸ
N68LB,d
LJ<R"
﷎ﶶﶸ﷌ﷂﶬﶮ﷊ﶼ﷊﷎ﶬ
ﴶﴸﴸﳜ
ﶴﶰﷂﶶﶰﷂﶬﶢ
RLL
0J8R:J
N64"
ﶺﶶ﷌﷊ﶼ﷤
﷎ﶶﶸ﷌ﷂﶬ﷤
ﴶﴸﳰﴶﴸﳰﴸﴸ
N68LB,d
LJ<R"
38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Futaba 12Z wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info