Bedienungsanleitung Futaba 14MZ (Seite 78 von 127) (Englisch)

29031

Zoom out

Zoom in

Vorherige Seite

1/127

Nächste Seite

Setting methods

●Group/single mode selection

Activating functions for only the selected

conditions:

1. Touch the Group button and switch to the

Sngl mode.

*Each time the button is touched, it toggles between the Gr.

and Sngl modes.

●Mixing mode selection

Using the offset mode:

1. Touch the Mode button and switch to the

Offset mode.

*Each time the button is touched, it toggles between the Mix

and Offset modes.

●Mixing setup screen selection

1. Touch the button of the mixing you want

to set. The mixing setup screen is displayed.

Activate the function.

2. Activate the function by touching the [INH]

button.

*Each time this button is touched, it toggles between [INH]

and [ON/OFF].

●Mixing ON/OFF switch setting and ON/OFF

direction switching

*An ON/OFF switch is not set even when the function is

activated.

1. When you want to turn mixing ON/OFF by

switch, touch the [NULL] button to call the

<Switch> screen and then select the switch

and its ON direction.

*For a description of the selection method, see [Switch

Setting Method] at the back of this manual.

●Master channel setting (except offset type

mixing)

1. Touch the Master button to call the Function

menu and select the master channel.

2. To link this mixing with other mixing, touch the

button at the left of the master channel and

select link.

*Each time the button is touched, it toggles between mixing

direction + and - and "No display" (no link).

*Master channel control can be set to stick, VR, and other

simple travels which do not include ATV, AFR, D/R, mixing

setting, etc. In this case, display the <Switch> screen by

touching the [H/W] button and then select master channel

side control.

●Slave channel setting

1. Touch the Slave button to call the Function

menu and select the slave channel.

2. To link this mixing with other mixing, touch

the button at the right-hand side of the slave

channel and select link.

*Each time the button is pressed, it toggles between mixing

direction + and - and "No display" (no link).

●Trim mode ON/OFF setting

1. To turn the trim mode ON/OFF, touch the Trim

button on the screen.

*When mixing includes master side trim, set the Trim button

to [ON]. When mixing does not include master side trim, set

the Trim button to [OFF].

*Each time this button is pressed, it toggles between [ON]

and [OFF].

*This is effective when the master channel is set by Function.

●Slave channel AFR mode (STK→STK)

1. When Link is set at the slave side, and you

want to add AFR (D/R) to the mixing rate,

select [ON]. When you do not want to add

AFR (D/R) to the mixing rate, select [OFF].

*Each time this button is pressed, it toggles between [ON]

and [OFF].

*This is effective when making corrections when the fuselage

is the same but the rudder angles are substantially different.

●Mixing curve type selection

1. Touch the curve type selection button of the

curve type you want to use to display the

selection screen and then select the curve

you want to use.

*For a description of the curve setting method, see the

description at the back of this manual.

●Fine tuning trim setting

1. When using the curve fine tuning function,

touch the [NULL] button of the Fine Tuning

item to call the <Switch> screen and then

select the lever, VR, etc. you want to use.

*For a description of the ﬁ ne tuning trim setting method, see

the description at the back of this manual.

●Servo speed setting

1. When setting the servo speed, touch the

Speed button. The Servo Speed setup screen

is displayed.

*For a description of the servo speed setting method, see the

description at the back of this manual.

*Offset mixing changes the speed. Use the Speed In and

Speed Out buttons to readjust the speed..

The mixing switch can set a delay with a different rate at

starting and stopping.

*This function is inactive when a mixing switch is not set.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Futaba 14MZ Seite 78

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info