Bedienungsanleitung Futaba 14MZ (Seite 88 von 127) (Englisch)

29031

Zoom out

Zoom in

Vorherige Seite

1/127

Nächste Seite

RUDDER 2

RUDDER

V-TAIL

RUDDER 2

Winglet

RUDDER 1

Winglet

at Flying wing at Flying wing

( )

AIL 3 AIL 3

(Chip Aileron)

AIL1

(Main Aileron)

AIL 2

(Main Aileron)

●Return to Model Menu

RUD to AIL

[Corresponding model type]: Airplane/glider, general

This function is used when you want to mix

the ailerons with rudder operation. It is used

when rudder is applied during roll maneuvers,

knife edge, etc. of stunt planes. It can be used to

bank scale models, large models, etc. like a full

size plane.

● A mixing curve can be set.

● Mixing during ﬂ ight can be turned ON/OFF by

setting a switch. (Always ON at [NULL] setting)

● The rate of correction rudder can be memorized

by using the memory function. This is convenient

when setting a mixing curve. When memory

operation (switch operation) is performed in the

memory mode with correction rudder applied, the

switch operation position at that time is displayed

● Touch the [RUD to AIL] button in the Model Menu to

call the setup screen shown below.

● Mixing curve setting

(For a description of the curve setting method, see the

description at the back of this manual.)

● Fine tuning VR setting

● When set to ON by touching [INH], the

memory items are displayed.

● Overall

adjustment by

Rate A and

Rate B.

on the mixing curve. When the memory mode is

exited, the memorized points are automatically

reﬂ ected on the curve. (When the memory

function is used, "Line" type curve is automatically

selected.)

● Linking can be set: Links this mixing to other

mixings.

● The mixing rate can be ﬁ ne-tune by setting a VR.

Setting method

● Touch the "INH" button and set the function to ACT

(ON).

● When setting a switch, touch the [NULL] button

to call the <Switch> screen, and then select the

switch and set its ON direction. (Always ON at

"NULL" setting)

(For a description of the switch selection method,

see the description at the back of this manual.)

● When setting a VR, touch the Fine tuning "NULL"

button to call the <Switch> screen and then select

the VR. The adjustment rate and adjustment

direction can be set,.

The VR operation mode can also be set.

(For a description of the ﬁ ne tuning VR setting

method, see the description at the back of this

manual.)

● A mixing curve can be set.

(For a description of the curve setting method,

see the description at the back of this manual.)

● The curve display mode can be changed.

Single : Displays the mixing curve only

Fine tuning : Displays the adjustment rate of the

ﬁ ne tuning VR

All Cond. : Displays the mixing curve of all the

conditions. (When conditions are set)

● When linking: Touch the Link button and set it to

ON.

Memory function usage method

(Example) Using the memory function with an F3A

airplane (knife edge correction)

*When call switch [SW-A] and memory switch

[SW-H] were set

[Memory function operation]

1. Memory function mode: [Manual] [Memory]

2. When the memory switch (SW-H) was set to ON

while performing aileron correction when rudder

was applied at knife edge, the point position at

that time is memorized. Perform memorization while

changing the left and right stick positions.

3. To recall the memorized positions, set [SW-A] to ON.

The memorized correction rate is reﬂ ected on the

curve, and operation is simultaneously set.

Note: When memorized from manual before ﬂ ight, be sure that

the memory SW is not accidentally set to ON and incorrect

mixing setting is not applied when taxiing, starting the engine,

etc.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Futaba 14MZ Seite 88

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info