Bedienungsanleitung Futaba 14SG (Seite 116 von 169) (Englisch)

564874

116

Zoom out

Zoom in

Vorherige Seite

1/169

Nächste Seite

115

MODEL MENU (AIRPLANE/GLIDER FUNCTIONS)

The dedicated mixes, etc. that are applicable

when an airplane or glider model type is selected

are displayed in this Model menu functions

section. Prior to adjusting any of these mixes, etc.

use the Model Type function in the Linkage menu

to select the model type, wing type, and tail type

matched to the aircraft. Other settings reset the

data used in mixing function, etc.

For glider, many dedicated mixes can be set

for each flight condition, as required. To switch

the settings for each condition by switch or stick

position, use the Condition Select function to add

flight conditions. (Up to five conditions can be

used)

Note: The T14SG is designed so that the airplane

and glider model types can utilize aircraft of the

same wing type.

The functions common to airplanes and gliders, with

the exception of some dedicated functions, are

written without regard to the model type.

While there may be differences, depending on the

number of servos, etc. the wing type used, etc. the

setup screens in the instruction manual are typical

examples.

Model Menu functions list

PITCH CURVE

Compatible with VPP (Variable Pitch Propeller)

function. [Airplane, general]

THR CURVE

THR curve function adjusts the throttle operation

curve for optimum engine speed to throttle stick

movement. [Airplane/glider, general]

THR DELAY

THR-DELAY function is used to slow the

response of the throttle stick to simulate the slow

response of a turbine engine, etc. [Airplane,

general]

AIL DIFFERENTIAL

The left and right aileron differential can be

adjusted independently. For glider, the differential



[Airplane/glider, 2 ailerons or more]

FLAP SETTING



independently for each servo according to the wing



AIL to CAMB.FLP



mode. It improves the roll axis characteristics.



AIL to BRKFLP



mode. It improves the roll axis characteristics.



*The Model menu screen depends on

the model type.



touching the MDL button twice at the home

screen, etc.



and return to the Model

menu by touching the

RTN button.

Or a HOME/

EXIT button is pushed.

<SensorTouch™>



you want to set and

access the setup

screen by touching

the RTN button.

Scrolling



cursor



RETURN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Futaba 14SG Seite 116

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info