Bedienungsanleitung Futaba 2PKA (Seite 1 von 8) (Englisch)

28967

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

FEATURES OF MAGNUM JUNIOR

The Magnum series are pistol grip type of AM 2 channel digital propor-

tional radio control sets and are the best in their class.

TRANSMITTER FP-T2PKA,

(FP-T2PK)_____________

• Newly designed cockpit type control panel

• Human-engineered size and design are easy to use.

•Steering rate adjuster The steering servo travel volume (right 81 left

evenly from neutral) can be adjusted simultaneously, while running.

•Throttle

ATV

The throttle

servo

travel

volume

can

be adjusted

and set with two trimmers, independently. FP-T2PKA

• Wheel angle adjuster. The turning angle of the steering wheel can

be increased and decreased. This allows operation at the best angle

• Neutral adjuster. The throttle trigger throttle stroke/brake deflection

stroke (back stroke) can be freely selected to match the application

•Servo reversing switch (steering and throttle) is standard Each servo

can be reversed from the outside. This is extremely convenient when

connecting the linkages.

• Since a level meter is provided, battery consumption can be seen at

a glance.

• Crystal can be changed from the outside. Crystal can be immediately

changed during competitions, etc. except 72 MHz and 75 MHz on

transmitter.

• Power supply can be changed to a nicad battery system. FP-T2PKA

RECEIVER

FP-R102GR_____________________

• BEC (Battery Eliminator Circuitry) system allows sharing of the

running Nicd battery and eliminates the need for a regulator and

diode.

•

Crystal socket

uses

new type

highly

reliable

subminiature

pins. Reliability is increased and the crystal can be changed from

the outside.

RECEIVER

FP-R104H_______________________

• High performance AM 4 channel receiver in which miniature size and

light weight have been achieved by using the PC board space to the

maximum.

• Short (50cm) antenna designed for miniature models is easy to mount.

(27MHz only)

•

Narrow

band

design using

narrow band ceramic filter

resists

adjacent

channel interference.

• Noise resistance achieved by using a pulse noise rejection circuit.

• New CMOS miniature 1C used in the data coder increases reliability

substantially.

• New type sub miniature, highly reliable pins used at the crystal socket

also increase reliability The crystal can be changed from the outside.

• Thick film gold-plated connector pins eliminate poor contact and

improve reliability against shock and vibration.

SERVO FP-S148, S129, S132H

•Motor

uses

the

newest helical type

rotor

for

improved

output

torque

and smooth operation. (S148, S129)

• These heavy-duty & water/dust tight servos are designed for use with

Futaba digital proportional

radio

control

sets

(S129)

• New indirect driver potentiometer improves vibration and shock re-

sistance and increases neutral precision tremendously.

• Futaba low-power custom 1C provides high starting torque, narrow

dead band, and excellent trackability.

• Fiberglass-reinforced PBT (polybutylene terephthalate) injection

molded servo case is mechanically strong and invulnerable against

glow fuel.

• Strong polyacetal resin ultra-precision servo gear features smooth

operation, positive neutral, and very little backlash.

• Fiberglass-reinforced epoxy resin PC board with thru-the-hole plating

improves servo amp vibration and shock resistance.

• Thick film gold-plated connector pins eliminate poor contact and

improve reliability against shock and vibration.

• Special grommet bushing simplifies servo mounting and improves the

cushioning effect.

• Six special adjustable splined horns are available.

• Maximum output torque of 48.7oz-in.(3.0kg-cm/3 5kg-cm) allows

use in almost any model (S148, S129)

• High operating speed of 0.13 sec/60° makes it perfect when especially

high speed is necessary. (S132H)

SET CONTENTS AND RATINGS

Transmitter

Receiver

Servo

Others

MAGNUM JUNIOR

FP-T2PKA

FP-R102GR or FP-R104H

FP-S148 x 2 or FP-S129 or

FP-S132H

Switch, battery holder, etc.

FP-T2PK

TRANSMITTER FP-T2PKA.

(FP-T2PK)_____________

Operating system : Pistol grip type, 2-channel

Transmitting frequency : 27MHz band 72/75MHz band

Modulation system : AM (amplitude modulation)

Power requirement 12V, AA penlight battery x 8

Receiver

PP-R102GR

________________________

Receiving frequency 75MHz

Intermediate frequency 455kHz

Selectivity :3kHz/-3dB

Receiving range 550 yards (500m) on the ground when

used with FP-T2PKA (At the best radio

wave condition of environment)

Power supply 4.8V to 8.4V

Current drain 7.2V/13mA, 4.8V/33mA

Dimensions 1.46 x 2.19 x 0.75 in. (37 x 55.5 x 19 mm)

Weight 1.34 oz (38g)

RECEIVER FP-R4H,

(FP-R104H)_________________

Miniature 4 channel AM receiver

Receiving frequency :27MHz band 72/75MHz

band

Intermediate frequency :455kHz

Power requirement :4.8V to 6.0V

Current drain :10mA

Dimensions :1.26 x 2.05 x 0.77 in. (32 x 52 x 19.4 mm)

Weight :

1.06 oz (30g

)

Receiving range :

220

yards(200m) on the ground when used

with

the

FP-T2PKA(At

the

best

radio

wave

condition of environment)

SERVO

PP-S148__________________________

Control system :+pulse width control

Operating angle : One side 45° or more

Power

requirement

4.8V-6V

Current drain (IDLE)

: 6.0V, 8mA (at idle)

Output torque :

42 oz. in. (3 kg-cm)

Operating speed :

0.22 sec/60°

Dimensions

: 1.59 x 0.77 x 1.4in. (40.4 x 19.8

mm)

Weight : 1.5 oz. (44.4g)

SERVO

FP-S129____________________________

Control system :+pulse control

Operating angle :Rotary system, one-side 45" or greater

(including trim)

Power requirement :4.8V to 6.0V (shared with receiver)

Current drain :6.0V, 8mA (at idle)

Output torque

:48.7 oz-in (3.5kg-cm)

Operating speed

:0.25 sec /60"

Dimensions :1.79 x 0.9 x 1.71 in. (45.5 x 23

mm)

Weight :2.1 oz (60g)

SERVO

FP-S132H___________________________

Operating system :+pulse control

Operating angle :Rotary system, one-side 40" or greater

(including trim)

Power requirement :4.8V to 6.0V (shared with receiver)

Current drain :6.0V, 8mA (at idle)

Output torque :25.02 oz-in (1.8kg-cm)

Operating speed :0.13 sec/60°

Dimensions :1.46 x 0.71 x 1.20 in. (37 x 18 x 30.5 mm)

Weight :1.13oz(32g)

Futaba 2PKA Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info