28971
16
Zoom out
Zoom in
Vorherige Seite
1/22
Nächste Seite
14
Description of 2PL Functions
Throttle End Point Adjustment (EPA-CH2)
This function is used to adjust the
forward and brake side servo
travel. Each direction can be
adjusted independent of each
other. Use this feature to set the
throttle servo travel.
Be sure that your throttle linkage does not apply excessive force
to the servo.
If your linkage installation causes an unreasonable amount of force to
be applied to the servo, the servo may be damaged and result in loss
of control.
Steering End Point Adjustment (EPA-CH1)
Use this function to limit the servo
movement to the left or right. The
servo travel to each side can be in-
dependently adjusted. This feature
will compensate for any difference
in right or left turning angles or ra-
dius due to the characteristics of
your model.
Be sure that the steering linkage does not bind or come in
contact with any suspension parts or arms.
If unreasonable force is applied to the servo, the servo may be dam-
aged and result in loss of control.
Steering EPA
Adjust the travel of the servo
while operating the steering
wheel each way.
Range: 0 - 120%
(Left side) (Right side)
Throttle EPA
Adjust the travel of the servo
while operating the throttle
trigger each way.
Range: 0 - 120%
(Forward side)
(Brake side)
ABS function (ABS-CH2)
This function simulates a full size
car's antilock braking by pulsing
the brake on and off rapidly.
Model stops as rapidly as possible
without skidding.
ABS Cycle Speed
OFF: Inhibited
FST: Active (fast)
MID: Active (middle)
SLW: Active (slow)
ABS function
(Selection key)
Model Name (NAME)
Model Name
(Selection key)
(Selection key)
Model number
1 - 0
Model name
This function provides a 3-charac-
ter name for each of the model
memories in the transmitter to
easily select the correct setup for
the model currently in use.
•Clearly label each model for easy
selection.
Warning
Warning
•The cycle speed can be selected from FST/MID/SLW.
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Futaba 2PL wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info