Bedienungsanleitung Futaba 9CAPsuper (Seite 25 von 109) (Englisch)

29007

Zoom out

Zoom in

Vorherige Seite

1/109

Nächste Seite

A LOOK AT THE RADIO'S FUNCTIONS STEP BY STEP

MODEL submenu: includes three functions that manage model memory: MODEL SELECT, MODEL COPY and MODEL NAME.

Since these functions are all related, and are all basic features used with most models, they are together in the MODEL

submenu of the BASIC menu.

MODEL SELECT: This function selects which of the 12 model memories in the transmitter

(or 6 in the optional CAMPac) to set up or fly. For clarity the model's name and an image

of its type are indicated after its number. (Each model memory may be of a different

model type from the other memories.)

Note: If you are using the optional CAMPac, your choices in MODEL SELECT and MODEL

COPY will include 13-18, which are the model memories in the CAMPac. You do not

have to COPY from the CAMPac to the transmitter prior to working with that model

memory.

T9C CAMPac data

Although a CAMPac data which saved the data of a conventional T9C transmitter cannot be used calling directly, it is

possible to use it by the following method, copying to the model memories of a T9C super transmitter. When using the

CAMPac, it will be displayed, for example as "13->01 (T9C)." Press D

IAL for 1 second in this state and the check display

of "sure?" will appear. Press D

IAL again, the data of CAMPac (13) will be copied to model number"01" of the T9C super

transmitter. As for the data of a function added by T9C super, an initial value is set up at this time. Please do not forget the

check of setting data before a flight.

In addition, refer to p.15 for the conversion method from T9C to T9C super of the CAMPac data itself.

NOTE: When you choose a new model in the MODEL SELECT function, if the

new model is set to the other modulation, you must cycle the transmitter

power to change modulations. If you do not cycle the power, the modulation

type will flash on the home screen to remind you. You are still transmitting

on the other modulation until you affect this change.

GOAL: STEPS: INPUTS:

Select Model #3.

NOTE: This is one of several functions

for which the radio requires confirma-

tion to make a change.

Open BASIC menu, then open

MODEL submenu.

Choose Model #3.

Confirm your change.

Close.

for 1 second.

(If ADVANCE, again.)

to 3.

for 1 second.

Confirm proper modulation of new

model memory.

Where next?

If PPM or PCM are flashing in the upper right hand corner, then the new model is

set for the other receiver type. Turn the transmitter off/on to change the modula-

tion.

NAME the model: see p. 27.

Change MODEL TYPE (aircraft, heli, glider): see p. 29.

Change modulation [FM (PPM) or PCM]: see p. 30.

Utilize servo REVERSE: see p. 31.

Adjust END POINTs: see p. 32.

Set up IDLE-DOWN and THR-CUT for throttle management: see p. 33.

Model type

• ACRO (aircraft)

• GLID (glider)

• HELI (helicopter)

FLASHING

if required to MODEL.

sure? displays.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Futaba 9CAPsuper Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info