Bedienungsanleitung Futaba 9ZAP_part1 (Seite 47 von 78) (Englisch)

29047

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

Model Setting Section

FMC—FUNCTION CONTROL

The Function Control Menu may be used to

define the relationship between the transmitter

controls

and

the

receiver

output

channels.

Any

function on the transmitter may control any

receiver

output

channel.

not

necessary

change the servo connections in the receiver.

This function is useful for changing the control

items for certain functions. For example, you may

wish to set the sailplane Butterfly function on the

throttle stick (J3) rather than on the default Knob

You may also use this function to select the

trim

positions,

independently

from

the

sticks.

For

instance, to set cross trims, simply exchange the

elevator (CH2) and throttle (CH3) trim positions.

One

advantage

cross

trims

that

possible

set

the

elevator

trim

without

releasing

the

eleva-

tor stick, by using the other hand. The default

mode for the PCM 1024Z system is for cross trims.

Control Modification Procedure

In the Model Menu, press the

FNC

key to get the

function modification menu.

Exit and Return to Model

Press to Select

Channel

Press

to Modify

Functions

Press to Modify Trims

Reverses

Operation

Direction

Channel Selection Keys

Use the

SEL (O)

key to make the channel selec-

tion

keys

appear, then

select

the desired channel

with

the

channel select keys E to L on the screen bottom.

To change the control, press the

CTR

(

) key.

Now you may select the desired control source from the

Stick, Control, or Switch keys. The bottom of the display

shows the keys LS , LD , RD , RS (Left Slider, Left Dial,

Right Dial, Right

Slider)

followed

byJ1,J2,J3,

(right

stick horizontal, right stick vertical, left stick vetical,

left stick vertical, left stick horizontal). If you want to use

a switch as an input instead, hit the

NXT

(M) key and

Switches A through H are displayed. If you wish to have

no function for a certain control, press

NXT

again and

select the NUL key ( E ). Repeat these steps for every

channel that needs to be changed. If you'd like to reverse

the function direction, press the +/- key (

R).

Stick AIL ELE THR RUD GEA FLP AU1 AU2

Control AIL ELE THR RUD GYR PIT AU1 AU2

Switch AIL ELE ABR EBB SF1 SF2 AU1 BFL

As an example, take a four-wing-servo sailplane. You

decide that you want the throttle stick

(J3

) to control

the Butterfly function. To do this, select SF2 with the

(J) key, press the

CTR

key, and choose the J3 but-

ton (K). You may then press the

SEL

key, select

airbrake (

ABK

), again press the control key (

CTR

and then null out the input control by pressing the

NXT

(M)

key twice, and finally pressing

NUL (E).

Press the END (N) key to leave this menu and

return to the Model Menu.

Trim Modification Procedure

This procedure is used to change the location of the

trim associated with a particular function. Use the SEL

key (O) to get the selection arrows across the screen

bottom, then use the arrow keys (E to L) to select the

desired channel.

To change the trim, press the

TRM (

Q) button,

then press the

T1, T2 , T3, T4. or NUL

keys. If you

wish to reverse the trim direction, press the

+/- (

key.

Repeat this process for each trim channel to be chang-

ed. When complete, use the END (N) key to return to

the Model Menu.

Model Setting Section, Page 45

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Futaba 9ZAP_part1 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info