Bedienungsanleitung Futaba 9ZHP_part2 (Seite 36 von 78) (Englisch)

29053

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

Helicopter Section

PiTCH-RuDDER (P-R)

This mixing, also called Revolution Mix. mixes

pitch commands into rudder in order to suppress

the torque generated by changes in the main

rotor's pitch angle. A five-point curve can be used

to control the shape of the mixing curve for each

flight condition. The up-side and down-side mixing

rates can be set, using Point 0 as the reference. A

trim volume can be input for each direction, and a

time delay to transition smoothly between flight

conditions may also be set.

Setting Up Pitch->Rudder Mixing

Pitch Mixing Activation

In the Condition Menu, press the

P-R

key to get the

PIT TO RUD menu shown below.

Mode selection

Curve setting

UP side rate setting

DOWN side

rate setting

Point movement

keys

To delay setting

screen

Trim volume

setting

Return to

condition menu

Mode setting Set value, including volume adjustment.

Use the A key to activate mode setting, then

press the

ACT

INH

keys F and G) to activate

or inhibit the function.

Setting Points -2, -1, 0, +1, +2

Press

the B key

turn on the

curve

inputting

function. Use the movement keys Q and R to select the

point whose value is to be set. The

PT->

key increases

the point number by one, and the

<-PT

key reduces the

point number by one. The active point on the curve is

shown as a black dot.

Once you have selected the desired point on the curve,

you may input the rate with the rate setting keys E to

. The number keys 0 through

100

input the value

directly. The + and - keys increase or decrease the

value by 0.5 with each button pressing (so it takes two

hits to see a number change because of numeric round-

ing). The +/- key changes the sign of the entered

number.

You may set or reset each point on the curve by

repeating these steps for each point.

Up-Side Rate Adjustment

Press

the C key and you may

input

the

rate

with

the

numeric keys

E to M .

You may set anywhere in the

range from 0 to 100% (initially the rate is set to 100%).

Down-Side Rate Adjustment

Press the D key and you may input the rate with the

numeric keys

E to M .

You may set anywhere in the

range from 0 to 100% (initially the rate is set to 100%).

Up & Down Sides Trim Volume selection

Enter the volume setting screen by pressing the O

key. For a description of the volume setting method, see

page 37. The volume control has an adjustment range of

±25% of the rates input above. No control is set as the

volume control at initial setting. Be sure that you are

setting the desired condition by verifying the condition

name.

Delay setting

Call

the delay setting

screen

pressing the NXT

( P ) key. Now press the key and set the delay with

the rate setting keys E to

. The setting range is 0 to

100%, and the initial value loaded is 0%.

Helicopter Section, Page 112

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Futaba 9ZHP_part2 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info